[PATCH net 2/2] qlcnic: Fix number of arguments in destroy tx context command

[Rajesh Borundia]

o Number of arguments taken by destroy tx command is three
instead of two.

Signed-off-by: Rajesh Borundia <***@qlogic.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
index 243752f..6e6f18f 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
@@ -11,7 +11,7 @@ static const struct qlcnic_mailbox_metadata qlcnic_mbx_tbl[] = {
{QLCNIC_CMD_CREATE_RX_CTX, 4, 1},
{QLCNIC_CMD_DESTROY_RX_CTX, 2, 1},
{QLCNIC_CMD_CREATE_TX_CTX, 4, 1},
- {QLCNIC_CMD_DESTROY_TX_CTX, 2, 1},
+ {QLCNIC_CMD_DESTROY_TX_CTX, 3, 1},
{QLCNIC_CMD_INTRPT_TEST, 4, 1},
{QLCNIC_CMD_SET_MTU, 4, 1},
{QLCNIC_CMD_READ_PHY, 4, 2},

[Rajesh Borundia]

o Initially we were programming maximum number of arguments.
Instead we should program number of arguments required in
a command.
o Maximum number of arguments for 82xx adapter is four. Fix it
for GET_ESWITCH_STATS command.

Signed-off-by: Rajesh Borundia <***@qlogic.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
index ffbae29..243752f 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
@@ -32,7 +32,7 @@ static const struct qlcnic_mailbox_metadata qlcnic_mbx_tbl[] = {
{QLCNIC_CMD_CONFIGURE_ESWITCH, 4, 1},
{QLCNIC_CMD_GET_MAC_STATS, 4, 1},
{QLCNIC_CMD_GET_ESWITCH_PORT_CONFIG, 4, 3},
- {QLCNIC_CMD_GET_ESWITCH_STATS, 5, 1},
+ {QLCNIC_CMD_GET_ESWITCH_STATS, 4, 1},
{QLCNIC_CMD_CONFIG_PORT, 4, 1},
{QLCNIC_CMD_TEMP_SIZE, 4, 4},
{QLCNIC_CMD_GET_TEMP_HDR, 4, 1},
@@ -129,7 +129,7 @@ int qlcnic_82xx_issue_cmd(struct qlcnic_adapter *adapter,
}

QLCWR32(adapter, QLCNIC_SIGN_CRB_OFFSET, signature);
- for (i = 1; i < QLCNIC_CDRP_MAX_ARGS; i++)
+ for (i = 1; i < cmd->req.num; i++)
QLCWR32(adapter, QLCNIC_CDRP_ARG(i), cmd->req.arg[i]);
QLCWR32(adapter, QLCNIC_CDRP_CRB_OFFSET,
QLCNIC_CDRP_FORM_CMD(cmd->req.arg[0]));

[David Miller]

From: Rajesh Borundia <***@qlogic.com>
Date: Tue, 14 Oct 2014 07:41:44 -0400

This series fixes following issues.
* We were programming maximum number of arguments supported by
adapter instead of required in a command.
* Destroy tx command requires three arguments instead of two.
Please apply these patches to net.

Series applied, thanks.