Read sent/received bytes -- without opening a file in /sys or /proc

[Jan-Philip gehrcke]

Dear list,

I'm about to write a small C program for measurements of the bandwidth
on some network interface of my home router (uname -a: Linux
fritz.fonwlan.box 2.6.19.2 #2 Thu Nov 18 16:35:17 CET 2010 mips
GNU/Linux). I would like to accomplish very *precise* results, while
keeping the absolute measurement time low.

In general, this problem requires the knowledge of time and byte
differences. Therefore, two time measurements and two byte counter
measurements for each, received and sent bytes, are required. Currently,
I am measuring time via

clock_gettime(CLOCK_MONOTONIC, ...)

and reading the byte counters by reading files in sysfs, e.g.

/sys/class/net/${interface}/statistics/rx_bytes.

This is very easy and works well, but reading these files four times
takes some (varying) time* on my device, which introduces an error to my
calculation.

Hence, I am wondering, if there is a way to receive this kind of data
directly and much faster, via "kernel API". My question is related to
this unanswered one from 2005:
http://linux.derkeiler.com/Mailing-Lists/RedHat/2005-02/0557.html

*On my device, reading such a file and interpreting the result as
integer takes 1-10 ms, measured via:

clock_gettime(CLOCK_MONOTONIC, &t_start);
rx_bytes = read_int_from_file("/sys/class/net/wan/statistics/rx_bytes");
clock_gettime(CLOCK_MONOTONIC, &t_end);

read_int_from_file() basically consists of fopen(), fgets(), and sscanf().


Please note that I don't have kernel/driver programming experience so far.

Thank you for help and any suggestions!

Jan-Philip Gehrcke

--
http://gehrcke.de
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Jan-Philip Gehrcke]

Dear list,

I'm about to write a small C program for measurements of the bandwidth
on some network interface of my home router (uname -a: Linux
fritz.fonwlan.box 2.6.19.2 #2 Thu Nov 18 16:35:17 CET 2010 mips
GNU/Linux). I would like to accomplish very *precise* results, while
keeping the absolute measurement time low.

In general, this problem requires the knowledge of time and byte
differences. Therefore, two time measurements and two byte counter
measurements for each, received and sent bytes, are required. Currently,
I am measuring time via

clock_gettime(CLOCK_MONOTONIC, ...)

and reading the byte counters by reading files in sysfs, e.g.

/sys/class/net/${interface}/statistics/rx_bytes.

This is very easy and works well, but reading these files four times
takes some (varying) time* on my device, which introduces an error to my
calculation.

Hence, I am wondering, if there is a way to receive this kind of data
directly and much faster, via "kernel API". My question is related to
this unanswered one from 2005:
http://linux.derkeiler.com/Mailing-Lists/RedHat/2005-02/0557.html

*On my device, reading such a file and interpreting the result as
integer takes 1-10 ms, measured via:

clock_gettime(CLOCK_MONOTONIC, &t_start);
rx_bytes = read_int_from_file("/sys/class/net/wan/statistics/rx_bytes");
clock_gettime(CLOCK_MONOTONIC, &t_end);

read_int_from_file() basically consists of fopen(), fgets(), and sscanf().


Please note that I don't have kernel/driver programming experience so far.

Thank you for help and any suggestions!

Jan-Philip Gehrcke

--
http://gehrcke.de
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Ben Greear]

Post by Jan-Philip gehrcke
Dear list,
I'm about to write a small C program for measurements of the bandwidth
on some network interface of my home router (uname -a: Linux
fritz.fonwlan.box 2.6.19.2 #2 Thu Nov 18 16:35:17 CET 2010 mips
GNU/Linux). I would like to accomplish very *precise* results, while
keeping the absolute measurement time low.
In general, this problem requires the knowledge of time and byte
differences. Therefore, two time measurements and two byte counter
measurements for each, received and sent bytes, are required. Currently,
I am measuring time via
clock_gettime(CLOCK_MONOTONIC, ...)
and reading the byte counters by reading files in sysfs, e.g.
/sys/class/net/${interface}/statistics/rx_bytes.
This is very easy and works well, but reading these files four times
takes some (varying) time* on my device, which introduces an error to my
calculation.
Hence, I am wondering, if there is a way to receive this kind of data
directly and much faster, via "kernel API". My question is related to
http://linux.derkeiler.com/Mailing-Lists/RedHat/2005-02/0557.html
*On my device, reading such a file and interpreting the result as
clock_gettime(CLOCK_MONOTONIC,&t_start);
rx_bytes = read_int_from_file("/sys/class/net/wan/statistics/rx_bytes");
clock_gettime(CLOCK_MONOTONIC,&t_end);
read_int_from_file() basically consists of fopen(), fgets(), and sscanf().
Please note that I don't have kernel/driver programming experience so far.
Thank you for help and any suggestions!
Jan-Philip Gehrcke

The netlink API can get stats for you, but I don't know if it would
be any more accurate time-wise. It's not exactly trivial to
implement this API, but you can look at the 'ip' program to get
an idea:

git clone git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/iproute2.git


There is also /proc/net/dev, but that may be worse than using sysfs
as far as performance and time accuracy goes.

Thanks,
Ben