Discussion:
[PATCH RFC 11/77] benet: Return -ENOSPC when not enough MSI-Xs available
(too old to reply)
Alexander Gordeev
2013-10-02 10:48:27 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/emulex/benet/be_main.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 100b528..3e2c834 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2378,6 +2378,8 @@ static int be_msix_enable(struct be_adapter *adapter)
num_vec);
if (!status)
goto done;
+ } else (status > 0) {
+ status = -ENOSPC;
}

dev_warn(dev, "MSIx enable failed\n");
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:14 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/infiniband/hw/qib/qib_pcie.c | 4 ----
1 files changed, 0 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index 3f14009..9580903 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -218,10 +218,6 @@ static void qib_msix_setup(struct qib_devdata *dd, int pos, u32 *msixcnt,
if (tabsize > *msixcnt)
tabsize = *msixcnt;
ret = pci_enable_msix(dd->pcidev, msix_entry, tabsize);
- if (ret > 0) {
- tabsize = ret;
- ret = pci_enable_msix(dd->pcidev, msix_entry, tabsize);
- }
do_intx:
if (ret) {
qib_dev_err(dd,
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:50 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/dma/ioat/dma.c | 10 +++++++---
1 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index acee3b2..b352ee6 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -915,15 +915,19 @@ int ioat_dma_setup_interrupts(struct ioatdma_device *device)

msix:
/* The number of MSI-X vectors should equal the number of channels */
+ err = pci_msix_table_size(pdev);
+ if (err < 0)
+ goto msi;
+ if (err < device->common.chancnt)
+ goto msix_single_vector;
+
msixcnt = device->common.chancnt;
for (i = 0; i < msixcnt; i++)
device->msix_entries[i].entry = i;

err = pci_enable_msix(pdev, device->msix_entries, msixcnt);
- if (err < 0)
+ if (err)
goto msi;
- if (err > 0)
- goto msix_single_vector;

for (i = 0; i < msixcnt; i++) {
msix = &device->msix_entries[i];
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:08 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/sun/niu.c | 20 +++++++++++---------
1 files changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/sun/niu.c b/drivers/net/ethernet/sun/niu.c
index f28460c..54c41b9 100644
--- a/drivers/net/ethernet/sun/niu.c
+++ b/drivers/net/ethernet/sun/niu.c
@@ -9051,26 +9051,28 @@ static void niu_try_msix(struct niu *np, u8 *ldg_num_map)
(np->port == 0 ? 3 : 1));
BUG_ON(num_irqs > (NIU_NUM_LDG / parent->num_ports));

-retry:
+ err = pci_msix_table_size(pdev);
+ if (err < 0)
+ goto fail;
+
+ num_irqs = min(num_irqs, err);
for (i = 0; i < num_irqs; i++) {
msi_vec[i].vector = 0;
msi_vec[i].entry = i;
}

err = pci_enable_msix(pdev, msi_vec, num_irqs);
- if (err < 0) {
- np->flags &= ~NIU_FLAGS_MSIX;
- return;
- }
- if (err > 0) {
- num_irqs = err;
- goto retry;
- }
+ if (err)
+ goto fail;

np->flags |= NIU_FLAGS_MSIX;
for (i = 0; i < num_irqs; i++)
np->ldg[i].irq = msi_vec[i].vector;
np->num_ldg = num_irqs;
+ return;
+
+fail:
+ np->flags &= ~NIU_FLAGS_MSIX;
}

static int niu_n2_irq_init(struct niu *np, u8 *ldg_num_map)
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:07 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/infiniband/hw/mthca/mthca_main.c | 16 +++++++++++-----
1 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 87897b9..3d44ca4 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -854,17 +854,23 @@ static int mthca_enable_msi_x(struct mthca_dev *mdev)
struct msix_entry entries[3];
int err;

+ err = pci_msix_table_size(mdev->pdev);
+ if (err < 0)
+ return err;
+ if (err < ARRAY_SIZE(entries)) {
+ mthca_info(mdev, "Only %d MSI-X vectors available, "
+ "not using MSI-X\n", err);
+
+ return -ENOSPC;
+ }
+
entries[0].entry = 0;
entries[1].entry = 1;
entries[2].entry = 2;

err = pci_enable_msix(mdev->pdev, entries, ARRAY_SIZE(entries));
- if (err) {
- if (err > 0)
- mthca_info(mdev, "Only %d MSI-X vectors available, "
- "not using MSI-X\n", err);
+ if (err)
return err;
- }

mdev->eq_table.eq[MTHCA_EQ_COMP ].msi_x_vector = entries[0].vector;
mdev->eq_table.eq[MTHCA_EQ_ASYNC].msi_x_vector = entries[1].vector;
--
1.7.7.6
Jack Morgenstein
2013-10-03 16:11:00 UTC
Permalink
On Wed, 2 Oct 2013 12:49:07 +0200
Subject: [PATCH RFC 51/77] mthca: Update MSI/MSI-X interrupts
enablement code Date: Wed, 2 Oct 2013 12:49:07 +0200
X-Mailer: git-send-email 1.7.7.6
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.
---
ACK.

-Jack
Alexander Gordeev
2013-10-02 10:49:26 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/misc/vmw_vmci/vmci_guest.c | 22 +++++++++++++++-------
1 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/misc/vmw_vmci/vmci_guest.c b/drivers/misc/vmw_vmci/vmci_guest.c
index b3a2b76..af5caf8 100644
--- a/drivers/misc/vmw_vmci/vmci_guest.c
+++ b/drivers/misc/vmw_vmci/vmci_guest.c
@@ -377,19 +377,27 @@ static int vmci_enable_msix(struct pci_dev *pdev,
{
int i;
int result;
+ int nvec;

- for (i = 0; i < VMCI_MAX_INTRS; ++i) {
+ result = pci_msix_table_size(pdev);
+ if (result < 0)
+ return result;
+
+ nvec = min(result, VMCI_MAX_INTRS);
+ if (nvec < VMCI_MAX_INTRS)
+ nvec = 1;
+
+ for (i = 0; i < nvec; ++i) {
vmci_dev->msix_entries[i].entry = i;
vmci_dev->msix_entries[i].vector = i;
}

- result = pci_enable_msix(pdev, vmci_dev->msix_entries, VMCI_MAX_INTRS);
- if (result == 0)
- vmci_dev->exclusive_vectors = true;
- else if (result > 0)
- result = pci_enable_msix(pdev, vmci_dev->msix_entries, 1);
+ result = pci_enable_msix(pdev, vmci_dev->msix_entries, nvec);
+ if (result)
+ return result;

- return result;
+ vmci_dev->exclusive_vectors = true;
+ return 0;
}

/*
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:15 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/qla2xxx/qla_isr.c | 18 +++++++++++-------
1 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index df1b30b..6c11ab9 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2836,16 +2836,20 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
for (i = 0; i < ha->msix_count; i++)
entries[i].entry = i;

- ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
- if (ret) {
+ ret = pci_msix_table_size(ha->pdev);
+ if (ret < 0) {
+ goto msix_failed;
+ } else {
if (ret < MIN_MSIX_COUNT)
goto msix_failed;

- ql_log(ql_log_warn, vha, 0x00c6,
- "MSI-X: Failed to enable support "
- "-- %d/%d\n Retry with %d vectors.\n",
- ha->msix_count, ret, ret);
- ha->msix_count = ret;
+ if (ret < ha->msix_count) {
+ ql_log(ql_log_warn, vha, 0x00c6,
+ "MSI-X: Failed to enable support "
+ "-- %d/%d\n Retry with %d vectors.\n",
+ ha->msix_count, ret, ret);
+ ha->msix_count = ret;
+ }
ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
if (ret) {
msix_failed:
--
1.7.7.6
Saurav Kashyap
2013-10-03 17:42:33 UTC
Permalink
Post by Alexander Gordeev
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.
---
drivers/scsi/qla2xxx/qla_isr.c | 18 +++++++++++-------
1 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_isr.c
b/drivers/scsi/qla2xxx/qla_isr.c
index df1b30b..6c11ab9 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2836,16 +2836,20 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp)
for (i = 0; i < ha->msix_count; i++)
entries[i].entry = i;
- ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
- if (ret) {
+ ret = pci_msix_table_size(ha->pdev);
+ if (ret < 0) {
+ goto msix_failed;
+ } else {
if (ret < MIN_MSIX_COUNT)
goto msix_failed;
- ql_log(ql_log_warn, vha, 0x00c6,
- "MSI-X: Failed to enable support "
- "-- %d/%d\n Retry with %d vectors.\n",
- ha->msix_count, ret, ret);
- ha->msix_count = ret;
+ if (ret < ha->msix_count) {
+ ql_log(ql_log_warn, vha, 0x00c6,
+ "MSI-X: Failed to enable support "
+ "-- %d/%d\n Retry with %d vectors.\n",
+ ha->msix_count, ret, ret);
+ ha->msix_count = ret;
+ }
ret = pci_enable_msix(ha->pdev, entries, ha->msix_count);
if (ret) {
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
More majordomo info at http://vger.kernel.org/majordomo-info.html
Alexander Gordeev
2013-10-02 10:49:01 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/megaraid/megaraid_sas_base.c | 20 +++++++++-----------
1 files changed, 9 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 3020921..b5973e4 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3727,18 +3727,16 @@ static int megasas_init_fw(struct megasas_instance *instance)
(unsigned int)num_online_cpus());
for (i = 0; i < instance->msix_vectors; i++)
instance->msixentry[i].entry = i;
- i = pci_enable_msix(instance->pdev, instance->msixentry,
- instance->msix_vectors);
- if (i >= 0) {
- if (i) {
- if (!pci_enable_msix(instance->pdev,
- instance->msixentry, i))
- instance->msix_vectors = i;
- else
- instance->msix_vectors = 0;
- }
- } else
+ i = pci_msix_table_size(instance->pdev);
+ if (i < 0) {
instance->msix_vectors = 0;
+ } else {
+ if (!pci_enable_msix(instance->pdev,
+ instance->msixentry, i))
+ instance->msix_vectors = i;
+ else
+ instance->msix_vectors = 0;
+ }

dev_info(&instance->pdev->dev, "[scsi%d]: FW supports"
"<%d> MSIX vector,Online CPUs: <%d>,"
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:31 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/broadcom/bnx2.c | 27 ++++++++++++++-------------
1 files changed, 14 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index e838a3f..c902627 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -6202,25 +6202,26 @@ bnx2_enable_msix(struct bnx2 *bp, int msix_vecs)
* is setup properly */
BNX2_RD(bp, BNX2_PCI_MSIX_CONTROL);

- for (i = 0; i < BNX2_MAX_MSIX_VEC; i++) {
- msix_ent[i].entry = i;
- msix_ent[i].vector = 0;
- }
-
total_vecs = msix_vecs;
#ifdef BCM_CNIC
total_vecs++;
#endif
- rc = -ENOSPC;
- while (total_vecs >= BNX2_MIN_MSIX_VEC) {
- rc = pci_enable_msix(bp->pdev, msix_ent, total_vecs);
- if (rc <= 0)
- break;
- if (rc > 0)
- total_vecs = rc;
+ rc = pci_msix_table_size(bp->pdev);
+ if (rc < 0)
+ return;
+
+ total_vecs = min(total_vecs, rc);
+ if (total_vecs < BNX2_MIN_MSIX_VEC)
+ return;
+
+ BUG_ON(total_vecs > ARRAY_SIZE(msix_ent));
+ for (i = 0; i < total_vecs; i++) {
+ msix_ent[i].entry = i;
+ msix_ent[i].vector = 0;
}

- if (rc != 0)
+ rc = pci_enable_msix(bp->pdev, msix_ent, total_vecs);
+ if (rc)
return;

msix_vecs = total_vecs;
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:58 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Note, in case just one MSI-X vector was available the
error message "0484 PCI enable MSI-X failed 1" is
preserved to not break tools which might depend on it.

Also, not sure why in case of multiple MSI-Xs mode failed
the driver skips the single MSI-X mode and falls back to
single MSI mode.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/lpfc/lpfc_init.c | 18 +++++++++++-------
1 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0803b84..d83a1a3 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -8639,13 +8639,17 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)

/* Configure MSI-X capability structure */
vectors = phba->cfg_fcp_io_channel;
-enable_msix_vectors:
- rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
- vectors);
- if (rc > 1) {
- vectors = rc;
- goto enable_msix_vectors;
- } else if (rc) {
+
+ rc = pci_msix_table_size(phba->pcidev);
+ if (rc < 0)
+ goto msg_fail_out;
+
+ vectors = min(vectors, rc);
+ if (vectors > 1)
+ rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
+ vectors);
+ if (rc) {
+msg_fail_out:
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0484 PCI enable MSI-X failed (%d)\n", rc);
goto vec_fail_out;
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:02 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/mellanox/mlx4/main.c | 17 ++++++++---------
1 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index 60c9f4f..377a5ea 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1852,8 +1852,16 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev)
int i;

if (msi_x) {
+ err = pci_msix_table_size(dev->pdev);
+ if (err < 0)
+ goto no_msi;
+
+ /* Try if at least 2 vectors are available */
nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs,
nreq);
+ nreq = min_t(int, nreq, err);
+ if (nreq < 2)
+ goto no_msi;

entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
if (!entries)
@@ -1862,17 +1870,8 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev)
for (i = 0; i < nreq; ++i)
entries[i].entry = i;

- retry:
err = pci_enable_msix(dev->pdev, entries, nreq);
if (err) {
- /* Try again if at least 2 vectors are available */
- if (err > 1) {
- mlx4_info(dev, "Requested %d vectors, "
- "but only %d MSI-X vectors available, "
- "trying again\n", nreq, err);
- nreq = err;
- goto retry;
- }
kfree(entries);
goto no_msi;
}
--
1.7.7.6
Jack Morgenstein
2013-10-03 08:02:54 UTC
Permalink
On Wed, 2 Oct 2013 12:49:02 +0200
Alexander Gordeev <***@redhat.com> wrote:

NACK. This change does not do anything logically as far as I can tell.
pci_enable_msix in the current upstream kernel itself calls
pci_msix_table_size. The current code yields the same results
as the code suggested below. (i.e., the suggested code has no effect on
optimality).

BTW, pci_msix_table_size never returns a value < 0 (if msix is not
enabled, it returns 0 for the table size), so the (err < 0) check here
is not correct. (I also do not like using "err" here anyway for the
value returned by pci_msix_table_size(). There is no error here, and
it is simply confusing.

-Jack
Post by Alexander Gordeev
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.
---
drivers/net/ethernet/mellanox/mlx4/main.c | 17 ++++++++---------
1 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c
b/drivers/net/ethernet/mellanox/mlx4/main.c index 60c9f4f..377a5ea
100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1852,8 +1852,16 @@ static void mlx4_enable_msi_x(struct mlx4_dev
*dev) int i;
if (msi_x) {
+ err = pci_msix_table_size(dev->pdev);
+ if (err < 0)
+ goto no_msi;
+
+ /* Try if at least 2 vectors are available */
nreq = min_t(int, dev->caps.num_eqs -
dev->caps.reserved_eqs, nreq);
+ nreq = min_t(int, nreq, err);
+ if (nreq < 2)
+ goto no_msi;
entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
if (!entries)
@@ -1862,17 +1870,8 @@ static void mlx4_enable_msi_x(struct mlx4_dev
*dev) for (i = 0; i < nreq; ++i)
entries[i].entry = i;
err = pci_enable_msix(dev->pdev, entries, nreq);
if (err) {
- /* Try again if at least 2 vectors are
available */
- if (err > 1) {
- mlx4_info(dev, "Requested %d
vectors, "
- "but only %d MSI-X vectors
available, "
- "trying again\n", nreq,
err);
- nreq = err;
- goto retry;
- }
kfree(entries);
goto no_msi;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Jack Morgenstein
2013-10-03 08:27:02 UTC
Permalink
On Wed, 2 Oct 2013 12:49:02 +0200
Alexander Gordeev <***@redhat.com> wrote:

UPDATING THIS REPLY.
Your change log confused me. The change below is not from a "recent
re-design", it is required due to an earlier patch in this patch set.
From the log, I assumed that the change you are talking about is already
upstream.

I will re-review.

-Jack

NACK. This change does not do anything logically as far as I can tell.
pci_enable_msix in the current upstream kernel itself calls
pci_msix_table_size. The current code yields the same resultswill
as the code suggested below. (i.e., the suggested code has no effect on
optimality).

BTW, pci_msix_table_size never returns a value < 0 (if msix is not
enabled, it returns 0 for the table size), so the (err < 0) check here
is not correct. (I also do not like using "err" here anyway for the
value returned by pci_msix_table_size(). There is no error here, and
it is simply confusing.

-Jack
Post by Alexander Gordeev
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.
---
drivers/net/ethernet/mellanox/mlx4/main.c | 17 ++++++++---------
1 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c
b/drivers/net/ethernet/mellanox/mlx4/main.c index 60c9f4f..377a5ea
100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -1852,8 +1852,16 @@ static void mlx4_enable_msi_x(struct mlx4_dev
*dev) int i;
if (msi_x) {
+ err = pci_msix_table_size(dev->pdev);
+ if (err < 0)
+ goto no_msi;
+
+ /* Try if at least 2 vectors are available */
nreq = min_t(int, dev->caps.num_eqs -
dev->caps.reserved_eqs, nreq);
+ nreq = min_t(int, nreq, err);
+ if (nreq < 2)
+ goto no_msi;
entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
if (!entries)
@@ -1862,17 +1870,8 @@ static void mlx4_enable_msi_x(struct mlx4_dev
*dev) for (i = 0; i < nreq; ++i)
entries[i].entry = i;
err = pci_enable_msix(dev->pdev, entries, nreq);
if (err) {
- /* Try again if at least 2 vectors are
available */
- if (err > 1) {
- mlx4_info(dev, "Requested %d
vectors, "
- "but only %d MSI-X vectors
available, "
- "trying again\n", nreq,
err);
- nreq = err;
- goto retry;
- }
kfree(entries);
goto no_msi;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Jack Morgenstein
2013-10-03 08:39:32 UTC
Permalink
On Wed, 2 Oct 2013 12:49:02 +0200
Post by Alexander Gordeev
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.
New review -- ACK (i.e., patch is OK), subject to acceptance of patches
05 and 07 of this patch set.

I sent my previous review (NACK) when I was not yet aware that
changes proposed were due to the two earlier patches (mentioned above)
in the current patch set.

The change log here should actually read something like the following:

As a result of changes to the MSI/MSI_X enabling procedures, this driver
must be modified in order to preserve its current msi/msi_x enablement
logic.

-Jack
Alexander Gordeev
2013-10-02 10:48:32 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/block/cciss.c | 17 +++++++----------
1 files changed, 7 insertions(+), 10 deletions(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index d2d95ff..80068a0 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4079,7 +4079,11 @@ static void cciss_interrupt_mode(ctlr_info_t *h)
goto default_int_mode;

if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) {
- err = pci_enable_msix(h->pdev, cciss_msix_entries, 4);
+ err = pci_msix_table_size(h->pdev);
+ if (err < ARRAY_SIZE(cciss_msix_entries))
+ goto default_int_mode;
+ err = pci_enable_msix(h->pdev, cciss_msix_entries,
+ ARRAY_SIZE(cciss_msix_entries));
if (!err) {
h->intr[0] = cciss_msix_entries[0].vector;
h->intr[1] = cciss_msix_entries[1].vector;
@@ -4088,15 +4092,8 @@ static void cciss_interrupt_mode(ctlr_info_t *h)
h->msix_vector = 1;
return;
}
- if (err > 0) {
- dev_warn(&h->pdev->dev,
- "only %d MSI-X vectors available\n", err);
- goto default_int_mode;
- } else {
- dev_warn(&h->pdev->dev,
- "MSI-X init failed %d\n", err);
- goto default_int_mode;
- }
+ dev_warn(&h->pdev->dev, "MSI-X init failed %d\n", err);
+ goto default_int_mode;
}
if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
if (!pci_enable_msi(h->pdev))
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:13 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/pmcraid.c | 23 +++++++++++------------
1 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 1eb7b028..5c62d22 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -4680,24 +4680,23 @@ pmcraid_register_interrupt_handler(struct pmcraid_instance *pinstance)

if ((pmcraid_enable_msix) &&
(pci_find_capability(pdev, PCI_CAP_ID_MSIX))) {
- int num_hrrq = PMCRAID_NUM_MSIX_VECTORS;
struct msix_entry entries[PMCRAID_NUM_MSIX_VECTORS];
+ int num_hrrq = ARRAY_SIZE(entries);
int i;
- for (i = 0; i < PMCRAID_NUM_MSIX_VECTORS; i++)
- entries[i].entry = i;
-
- rc = pci_enable_msix(pdev, entries, num_hrrq);
- if (rc < 0)
- goto pmcraid_isr_legacy;

/* Check how many MSIX vectors are allocated and register
* msi-x handlers for each of them giving appropriate buffer
*/
- if (rc > 0) {
- num_hrrq = rc;
- if (pci_enable_msix(pdev, entries, num_hrrq))
- goto pmcraid_isr_legacy;
- }
+ rc = pci_msix_table_size(pdev);
+ if (rc < 0)
+ goto pmcraid_isr_legacy;
+
+ num_hrrq = min(num_hrrq, rc);
+ for (i = 0; i < num_hrrq; i++)
+ entries[i].entry = i;
+
+ if (pci_enable_msix(pdev, entries, num_hrrq))
+ goto pmcraid_isr_legacy;

for (i = 0; i < num_hrrq; i++) {
pinstance->hrrq_vector[i].hrrq_id = i;
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:37 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/csiostor/csio_isr.c | 18 ++++++++++++------
1 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/csiostor/csio_isr.c b/drivers/scsi/csiostor/csio_isr.c
index abf20ab..b8a840e 100644
--- a/drivers/scsi/csiostor/csio_isr.c
+++ b/drivers/scsi/csiostor/csio_isr.c
@@ -512,6 +512,16 @@ csio_enable_msix(struct csio_hw *hw)
if (hw->flags & CSIO_HWF_USING_SOFT_PARAMS || !csio_is_hw_master(hw))
cnt = min_t(uint8_t, hw->cfg_niq, cnt);

+ rv = pci_msix_table_size(hw->pdev);
+ if (rv < 0)
+ return rv;
+
+ cnt = min(cnt, rv);
+ if (cnt < min) {
+ csio_info(hw, "Not using MSI-X, remainder:%d\n", rv);
+ return -ENOSPC;
+ }
+
entries = kzalloc(sizeof(struct msix_entry) * cnt, GFP_KERNEL);
if (!entries)
return -ENOMEM;
@@ -521,19 +531,15 @@ csio_enable_msix(struct csio_hw *hw)

csio_dbg(hw, "FW supp #niq:%d, trying %d msix's\n", hw->cfg_niq, cnt);

- while ((rv = pci_enable_msix(hw->pdev, entries, cnt)) >= min)
- cnt = rv;
+ rv = pci_enable_msix(hw->pdev, entries, cnt);
if (!rv) {
if (cnt < (hw->num_sqsets + extra)) {
csio_dbg(hw, "Reducing sqsets to %d\n", cnt - extra);
csio_reduce_sqsets(hw, cnt - extra);
}
} else {
- if (rv > 0)
- csio_info(hw, "Not using MSI-X, remainder:%d\n", rv);
-
kfree(entries);
- return -ENOSPC;
+ return rv;
}

/* Save off vectors */
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:40 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 29 ++++++++++++-----------
1 files changed, 15 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
index 915729c..bf14fd6 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
@@ -3090,25 +3090,26 @@ static int cxgb_enable_msix(struct adapter *adap)
int vectors;
int i, err;

- vectors = ARRAY_SIZE(entries);
+ err = pci_msix_table_size(adap->pdev);
+ if (err < 0)
+ return err;
+
+ vectors = min_t(int, err, ARRAY_SIZE(entries));
+ if (vectors < (adap->params.nports + 1))
+ return -ENOSPC;
+
for (i = 0; i < vectors; ++i)
entries[i].entry = i;

- while ((err = pci_enable_msix(adap->pdev, entries, vectors)) > 0)
- vectors = err;
-
- if (!err && vectors < (adap->params.nports + 1)) {
- pci_disable_msix(adap->pdev);
- err = -ENOSPC;
- }
+ err = pci_enable_msix(adap->pdev, entries, vectors);
+ if (err)
+ return err;

- if (!err) {
- for (i = 0; i < vectors; ++i)
- adap->msix_info[i].vec = entries[i].vector;
- adap->msix_nvectors = vectors;
- }
+ for (i = 0; i < vectors; ++i)
+ adap->msix_info[i].vec = entries[i].vector;
+ adap->msix_nvectors = vectors;

- return err;
+ return 0;
}

static void print_port_info(struct adapter *adap, const struct adapter_info *ai)
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:06 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/mellanox/mlx5/core/main.c | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index adf0e5d..5c21e50 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -119,8 +119,13 @@ static int mlx5_enable_msix(struct mlx5_core_dev *dev)
int err;
int i;

+ err = pci_msix_table_size(dev->pdev);
+ if (err < 0)
+ return err;
+
nvec = dev->caps.num_ports * num_online_cpus() + MLX5_EQ_VEC_COMP_BASE;
nvec = min_t(int, nvec, num_eqs);
+ nvec = min_t(int, nvec, err);
if (nvec <= MLX5_EQ_VEC_COMP_BASE)
return -ENOSPC;

@@ -131,20 +136,15 @@ static int mlx5_enable_msix(struct mlx5_core_dev *dev)
for (i = 0; i < nvec; i++)
table->msix_arr[i].entry = i;

-retry:
- table->num_comp_vectors = nvec - MLX5_EQ_VEC_COMP_BASE;
err = pci_enable_msix(dev->pdev, table->msix_arr, nvec);
- if (err <= 0) {
+ if (err) {
+ kfree(table->msix_arr);
return err;
- } else if (err > MLX5_EQ_VEC_COMP_BASE) {
- nvec = err;
- goto retry;
}

- mlx5_core_dbg(dev, "received %d MSI vectors out of %d requested\n", err, nvec);
- kfree(table->msix_arr);
+ table->num_comp_vectors = nvec - MLX5_EQ_VEC_COMP_BASE;

- return -ENOSPC;
+ return 0;
}

static void mlx5_disable_msix(struct mlx5_core_dev *dev)
--
1.7.7.6
Eli Cohen
2013-10-03 07:14:33 UTC
Permalink
Post by Alexander Gordeev
+ err = pci_msix_table_size(dev->pdev);
+ if (err < 0)
+ return err;
+
nvec = dev->caps.num_ports * num_online_cpus() + MLX5_EQ_VEC_COMP_BASE;
nvec = min_t(int, nvec, num_eqs);
+ nvec = min_t(int, nvec, err);
if (nvec <= MLX5_EQ_VEC_COMP_BASE)
return -ENOSPC;
Making sure we don't request more vectors then the device's is capable
of -- looks good.
Post by Alexander Gordeev
@@ -131,20 +136,15 @@ static int mlx5_enable_msix(struct mlx5_core_dev *dev)
for (i = 0; i < nvec; i++)
table->msix_arr[i].entry = i;
- table->num_comp_vectors = nvec - MLX5_EQ_VEC_COMP_BASE;
err = pci_enable_msix(dev->pdev, table->msix_arr, nvec);
- if (err <= 0) {
+ if (err) {
+ kfree(table->msix_arr);
return err;
- } else if (err > MLX5_EQ_VEC_COMP_BASE) {
- nvec = err;
- goto retry;
}
According to latest sources, pci_enable_msix() may still fail so why
do you want to remove this code?
Post by Alexander Gordeev
- mlx5_core_dbg(dev, "received %d MSI vectors out of %d requested\n", err, nvec);
- kfree(table->msix_arr);
+ table->num_comp_vectors = nvec - MLX5_EQ_VEC_COMP_BASE;
- return -ENOSPC;
+ return 0;
}
static void mlx5_disable_msix(struct mlx5_core_dev *dev)
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
More majordomo info at http://vger.kernel.org/majordomo-info.html
Alexander Gordeev
2013-10-03 19:48:39 UTC
Permalink
Post by Eli Cohen
Post by Alexander Gordeev
+ err = pci_msix_table_size(dev->pdev);
+ if (err < 0)
+ return err;
+
nvec = dev->caps.num_ports * num_online_cpus() + MLX5_EQ_VEC_COMP_BASE;
nvec = min_t(int, nvec, num_eqs);
+ nvec = min_t(int, nvec, err);
if (nvec <= MLX5_EQ_VEC_COMP_BASE)
return -ENOSPC;
Making sure we don't request more vectors then the device's is capable
of -- looks good.
Post by Alexander Gordeev
@@ -131,20 +136,15 @@ static int mlx5_enable_msix(struct mlx5_core_dev *dev)
for (i = 0; i < nvec; i++)
table->msix_arr[i].entry = i;
- table->num_comp_vectors = nvec - MLX5_EQ_VEC_COMP_BASE;
err = pci_enable_msix(dev->pdev, table->msix_arr, nvec);
- if (err <= 0) {
+ if (err) {
+ kfree(table->msix_arr);
return err;
- } else if (err > MLX5_EQ_VEC_COMP_BASE) {
- nvec = err;
- goto retry;
}
According to latest sources, pci_enable_msix() may still fail so why
do you want to remove this code?
pci_enable_msix() may fail, but it can not return a positive number.

We first calculate how many MSI-Xs we need, adjust to what we can get,
check if that is enough and only then go for it.
Post by Eli Cohen
Post by Alexander Gordeev
- mlx5_core_dbg(dev, "received %d MSI vectors out of %d requested\n", err, nvec);
- kfree(table->msix_arr);
+ table->num_comp_vectors = nvec - MLX5_EQ_VEC_COMP_BASE;
- return -ENOSPC;
+ return 0;
}
static void mlx5_disable_msix(struct mlx5_core_dev *dev)
--
Regards,
Alexander Gordeev
***@redhat.com
Alexander Gordeev
2013-10-02 10:48:26 UTC
Permalink
Do not trust the hardware and always check if MSI
Revert to Single Message mode was enforced. Fall
back to the single MSI mode in case it did. Not
doing so might screw up the interrupt handling.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/ata/ahci.c | 17 +++++++++++++++++
drivers/ata/ahci.h | 1 +
2 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index f1c8838..3a39cc8 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1091,6 +1091,14 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
{}
#endif

+static int ahci_get_mrsm(struct ahci_host_priv *hpriv)
+{
+ void __iomem *mmio = hpriv->mmio;
+ u32 ctl = readl(mmio + HOST_CTL);
+
+ return ctl & HOST_MRSM;
+}
+
int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
struct ahci_host_priv *hpriv)
{
@@ -1116,6 +1124,15 @@ int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
if (rc)
goto intx;

+ /*
+ * Fallback to single MSI mode if the controller enforced MRSM mode
+ */
+ if (ahci_get_mrsm(hpriv)) {
+ pci_disable_msi(pdev);
+ printk(KERN_INFO "ahci: MRSM is on, fallback to single MSI\n");
+ goto single_msi;
+ }
+
return nvec;

single_msi:
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 1145637..19bc846 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -91,6 +91,7 @@ enum {
/* HOST_CTL bits */
HOST_RESET = (1 << 0), /* reset controller; self-clear */
HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
+ HOST_MRSM = (1 << 2), /* MSI Revert to Single Message */
HOST_AHCI_EN = (1 << 31), /* AHCI enabled */

/* HOST_CAP bits */
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:56 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 18 +++++++-----------
1 files changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index fa0537a..d506a01 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1749,8 +1749,7 @@ void ixgbevf_reset(struct ixgbevf_adapter *adapter)
static int ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
int vectors)
{
- int err = 0;
- int vector_threshold;
+ int err, vector_threshold;

/* We'll want at least 2 (vector_threshold):
* 1) TxQ[0] + RxQ[0] handler
@@ -1763,18 +1762,15 @@ static int ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
* Right now, we simply care about how many we'll get; we'll
* set them up later while requesting irq's.
*/
- while (vectors >= vector_threshold) {
- err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
- vectors);
- if (!err || err < 0) /* Success or a nasty failure. */
- break;
- else /* err == number of vectors we should try again with */
- vectors = err;
- }
+ err = pci_msix_table_size(adapter->pdev);
+ if (err < 0)
+ return err;

+ vectors = min(vectors, err);
if (vectors < vector_threshold)
- err = -ENOSPC;
+ return -ENOSPC;

+ err = pci_enable_msix(adapter->pdev, adapter->msix_entries, vectors);
if (err) {
dev_err(&adapter->pdev->dev,
"Unable to allocate MSI-X interrupts\n");
--
1.7.7.6
Keller, Jacob E
2013-10-02 20:50:51 UTC
Permalink
Post by Alexander Gordeev
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.
---
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 18 +++++++-----------
1 files changed, 7 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index fa0537a..d506a01 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1749,8 +1749,7 @@ void ixgbevf_reset(struct ixgbevf_adapter *adapter)
static int ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
int vectors)
{
- int err = 0;
- int vector_threshold;
+ int err, vector_threshold;
* 1) TxQ[0] + RxQ[0] handler
@@ -1763,18 +1762,15 @@ static int ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
* Right now, we simply care about how many we'll get; we'll
* set them up later while requesting irq's.
*/
- while (vectors >= vector_threshold) {
- err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
- vectors);
- if (!err || err < 0) /* Success or a nasty failure. */
- break;
- else /* err == number of vectors we should try again with */
- vectors = err;
- }
+ err = pci_msix_table_size(adapter->pdev);
I would prefer to use something other than "err" here since the value
isn't really an error if it's greater than 0. However, it's not really a
big issue, since you immediately conver to using vectors on the next
line of code.. I think its alright overall.

Regards,
Jake
Post by Alexander Gordeev
+ if (err < 0)
+ return err;
+ vectors = min(vectors, err);
if (vectors < vector_threshold)
- err = -ENOSPC;
+ return -ENOSPC;
+ err = pci_enable_msix(adapter->pdev, adapter->msix_entries, vectors);
if (err) {
dev_err(&adapter->pdev->dev,
"Unable to allocate MSI-X interrupts\n");
Alexander Gordeev
2013-10-02 10:49:23 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/rapidio/devices/tsi721.c | 27 +++++++++++++++++----------
1 files changed, 17 insertions(+), 10 deletions(-)

diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
index ff7cbf2..5edd920 100644
--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -734,6 +734,16 @@ static int tsi721_enable_msix(struct tsi721_device *priv)
int err;
int i;

+ err = pci_msix_table_size(priv->pdev);
+ if (err < 0)
+ goto err_out;
+ if (err < ARRAY_SIZE(entries)) {
+ dev_info(&priv->pdev->dev,
+ "Only %d MSI-X vectors available, not using MSI-X\n",
+ err);
+ return -ENOSPC;
+ }
+
entries[TSI721_VECT_IDB].entry = TSI721_MSIX_SR2PC_IDBQ_RCV(IDB_QUEUE);
entries[TSI721_VECT_PWRX].entry = TSI721_MSIX_SRIO_MAC_INT;

@@ -769,16 +779,8 @@ static int tsi721_enable_msix(struct tsi721_device *priv)
#endif /* CONFIG_RAPIDIO_DMA_ENGINE */

err = pci_enable_msix(priv->pdev, entries, ARRAY_SIZE(entries));
- if (err) {
- if (err > 0)
- dev_info(&priv->pdev->dev,
- "Only %d MSI-X vectors available, "
- "not using MSI-X\n", err);
- else
- dev_err(&priv->pdev->dev,
- "Failed to enable MSI-X (err=%d)\n", err);
- return err;
- }
+ if (err)
+ goto err_out;

/*
* Copy MSI-X vector information into tsi721 private structure
@@ -833,6 +835,11 @@ static int tsi721_enable_msix(struct tsi721_device *priv)
#endif /* CONFIG_RAPIDIO_DMA_ENGINE */

return 0;
+
+err_out:
+ dev_err(&priv->pdev->dev,
+ "Failed to enable MSI-X (err=%d)\n", err);
+ return err;
}
#endif /* CONFIG_PCI_MSI */
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:24 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/sfc/efx.c | 18 +++++++++++-------
1 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index 07c9bc4..184ef9f 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -1261,21 +1261,24 @@ static int efx_probe_interrupts(struct efx_nic *efx)
n_channels += extra_channels;
n_channels = min(n_channels, efx->max_channels);

- for (i = 0; i < n_channels; i++)
- xentries[i].entry = i;
- rc = pci_enable_msix(efx->pci_dev, xentries, n_channels);
- if (rc > 0) {
+ rc = pci_msix_table_size(efx->pci_dev);
+ if (rc < 0)
+ goto msi;
+
+ if (rc < n_channels) {
netif_err(efx, drv, efx->net_dev,
"WARNING: Insufficient MSI-X vectors"
" available (%d < %u).\n", rc, n_channels);
netif_err(efx, drv, efx->net_dev,
"WARNING: Performance may be reduced.\n");
- EFX_BUG_ON_PARANOID(rc >= n_channels);
n_channels = rc;
- rc = pci_enable_msix(efx->pci_dev, xentries,
- n_channels);
}

+ EFX_BUG_ON_PARANOID(n_channels > ARRAY_SIZE(xentries));
+ for (i = 0; i < n_channels; i++)
+ xentries[i].entry = i;
+
+ rc = pci_enable_msix(efx->pci_dev, xentries, n_channels);
if (rc == 0) {
efx->n_channels = n_channels;
if (n_channels > extra_channels)
@@ -1293,6 +1296,7 @@ static int efx_probe_interrupts(struct efx_nic *efx)
efx_get_channel(efx, i)->irq =
xentries[i].vector;
} else {
+msi:
/* Fall back to single channel MSI */
efx->interrupt_mode = EFX_INT_MODE_MSI;
netif_err(efx, drv, efx->net_dev,
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:25 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/broadcom/tg3.c | 24 +++++++++++++-----------
1 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 12d961c..2e842ef3 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -11241,6 +11241,10 @@ static bool tg3_enable_msix(struct tg3 *tp)
int i, rc;
struct msix_entry msix_ent[TG3_IRQ_MAX_VECS];

+ rc = pci_msix_table_size(tp->pdev);
+ if (rc < 0)
+ return false;
+
tp->txq_cnt = tp->txq_req;
tp->rxq_cnt = tp->rxq_req;
if (!tp->rxq_cnt)
@@ -11256,6 +11260,14 @@ static bool tg3_enable_msix(struct tg3 *tp)
tp->txq_cnt = 1;

tp->irq_cnt = tg3_irq_count(tp);
+ if (tp->irq_cnt > rc) {
+ netdev_notice(tp->dev, "Requested %d MSI-Xs, available %d\n",
+ tp->irq_cnt, rc);
+ tp->irq_cnt = rc;
+ tp->rxq_cnt = max(rc - 1, 1);
+ if (tp->txq_cnt)
+ tp->txq_cnt = min(tp->rxq_cnt, tp->txq_max);
+ }

for (i = 0; i < tp->irq_max; i++) {
msix_ent[i].entry = i;
@@ -11263,18 +11275,8 @@ static bool tg3_enable_msix(struct tg3 *tp)
}

rc = pci_enable_msix(tp->pdev, msix_ent, tp->irq_cnt);
- if (rc < 0) {
+ if (rc)
return false;
- } else if (rc != 0) {
- if (pci_enable_msix(tp->pdev, msix_ent, rc))
- return false;
- netdev_notice(tp->dev, "Requested %d MSI-X vectors, received %d\n",
- tp->irq_cnt, rc);
- tp->irq_cnt = rc;
- tp->rxq_cnt = max(rc - 1, 1);
- if (tp->txq_cnt)
- tp->txq_cnt = min(tp->rxq_cnt, tp->txq_max);
- }

for (i = 0; i < tp->irq_max; i++)
tp->napi[i].irq_vec = msix_ent[i].vector;
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:12 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/block/nvme-core.c | 48 +++++++++++++++++++++++---------------------
1 files changed, 25 insertions(+), 23 deletions(-)

diff --git a/drivers/block/nvme-core.c b/drivers/block/nvme-core.c
index da52092..f69d7af 100644
--- a/drivers/block/nvme-core.c
+++ b/drivers/block/nvme-core.c
@@ -1774,34 +1774,36 @@ static int nvme_setup_io_queues(struct nvme_dev *dev)
/* Deregister the admin queue's interrupt */
free_irq(dev->entry[0].vector, dev->queues[0]);

- vecs = nr_io_queues;
+ result = pci_msix_table_size(pdev);
+ if (result < 0)
+ goto msi;
+
+ vecs = min(result, nr_io_queues);
for (i = 0; i < vecs; i++)
dev->entry[i].entry = i;
- for (;;) {
- result = pci_enable_msix(pdev, dev->entry, vecs);
- if (result <= 0)
- break;
- vecs = result;
- }

- if (result < 0) {
- vecs = nr_io_queues;
- if (vecs > 32)
- vecs = 32;
- for (;;) {
- result = pci_enable_msi_block(pdev, vecs);
- if (result == 0) {
- for (i = 0; i < vecs; i++)
- dev->entry[i].vector = i + pdev->irq;
- break;
- } else if (result < 0) {
- vecs = 1;
- break;
- }
- vecs = result;
- }
+ result = pci_enable_msix(pdev, dev->entry, vecs);
+ if (result == 0)
+ goto irq;
+
+ msi:
+ result = pci_get_msi_cap(pdev);
+ if (result < 0)
+ goto no_msi;
+
+ vecs = min(result, nr_io_queues);
+
+ result = pci_enable_msi_block(pdev, vecs);
+ if (result == 0) {
+ for (i = 0; i < vecs; i++)
+ dev->entry[i].vector = i + pdev->irq;
+ goto irq;
}

+ no_msi:
+ vecs = 1;
+
+ irq:
/*
* Should investigate if there's a performance win from allocating
* more queues than interrupt vectors; it might allow the submission
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:33 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/neterion/vxge/vxge-main.c | 36 ++++++++++-------------
1 files changed, 16 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index b81ff8b..b4d40dd 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -2297,7 +2297,21 @@ static int vxge_alloc_msix(struct vxgedev *vdev)
int msix_intr_vect = 0, temp;
vdev->intr_cnt = 0;

-start:
+ ret = pci_msix_table_size(vdev->pdev);
+ if (ret < 0)
+ goto alloc_entries_failed;
+
+ if (ret < (vdev->no_of_vpath * 2 + 1)) {
+ if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) {
+ ret = -ENOSPC;
+ goto alloc_entries_failed;
+ }
+ /* Try with less no of vector by reducing no of vpaths count */
+ temp = (ret - 1)/2;
+ vxge_close_vpaths(vdev, temp);
+ vdev->no_of_vpath = temp;
+ }
+
/* Tx/Rx MSIX Vectors count */
vdev->intr_cnt = vdev->no_of_vpath * 2;

@@ -2347,25 +2361,7 @@ start:
vdev->vxge_entries[j].in_use = 0;

ret = pci_enable_msix(vdev->pdev, vdev->entries, vdev->intr_cnt);
- if (ret > 0) {
- vxge_debug_init(VXGE_ERR,
- "%s: MSI-X enable failed for %d vectors, ret: %d",
- VXGE_DRIVER_NAME, vdev->intr_cnt, ret);
- if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) {
- ret = -ENOSPC;
- goto enable_msix_failed;
- }
-
- kfree(vdev->entries);
- kfree(vdev->vxge_entries);
- vdev->entries = NULL;
- vdev->vxge_entries = NULL;
- /* Try with less no of vector by reducing no of vpaths count */
- temp = (ret - 1)/2;
- vxge_close_vpaths(vdev, temp);
- vdev->no_of_vpath = temp;
- goto start;
- } else if (ret < 0)
+ if (ret)
goto enable_msix_failed;
return 0;
--
1.7.7.6
Jon Mason
2013-10-03 00:29:42 UTC
Permalink
Post by Alexander Gordeev
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.
---
drivers/net/ethernet/neterion/vxge/vxge-main.c | 36 ++++++++++-------------
1 files changed, 16 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index b81ff8b..b4d40dd 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -2297,7 +2297,21 @@ static int vxge_alloc_msix(struct vxgedev *vdev)
int msix_intr_vect = 0, temp;
vdev->intr_cnt = 0;
+ ret = pci_msix_table_size(vdev->pdev);
+ if (ret < 0)
+ goto alloc_entries_failed;
+
+ if (ret < (vdev->no_of_vpath * 2 + 1)) {
+ if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) {
+ ret = -ENOSPC;
+ goto alloc_entries_failed;
+ }
+ /* Try with less no of vector by reducing no of vpaths count */
+ temp = (ret - 1)/2;
+ vxge_close_vpaths(vdev, temp);
+ vdev->no_of_vpath = temp;
+ }
The original code was ugly (not my code, so I can say that). I'd like
to see it a little stream lined. Something like:


vdev->intr_cnt = pci_msix_table_size(vdev->pdev);

if (vdev->intr_cnt % 2 == 0)
vdev->intr_cnt--;

if (vdev->intr_cnt < 3 || max_config_vpath != VXGE_USE_DEFAULT)
goto alloc_entries_failed;

if (vdev->intr_cnt != vdev->no_of_vpath * 2 + 1) {
vxge_close_vpaths(vdev, vdev->intr_cnt / 2);
vdev->no_of_vpath = vdev->intr_cnt / 2;
}
Post by Alexander Gordeev
+
/* Tx/Rx MSIX Vectors count */
vdev->intr_cnt = vdev->no_of_vpath * 2;
vdev->vxge_entries[j].in_use = 0;
ret = pci_enable_msix(vdev->pdev, vdev->entries, vdev->intr_cnt);
- if (ret > 0) {
- vxge_debug_init(VXGE_ERR,
- "%s: MSI-X enable failed for %d vectors, ret: %d",
- VXGE_DRIVER_NAME, vdev->intr_cnt, ret);
- if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) {
- ret = -ENOSPC;
- goto enable_msix_failed;
- }
-
- kfree(vdev->entries);
- kfree(vdev->vxge_entries);
- vdev->entries = NULL;
- vdev->vxge_entries = NULL;
- /* Try with less no of vector by reducing no of vpaths count */
- temp = (ret - 1)/2;
- vxge_close_vpaths(vdev, temp);
- vdev->no_of_vpath = temp;
- goto start;
- } else if (ret < 0)
+ if (ret)
goto enable_msix_failed;
Nit, space here please.
Post by Alexander Gordeev
return 0;
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:47 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/hpsa.c | 28 +++++++++++++---------------
1 files changed, 13 insertions(+), 15 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 393c8db..eb17b3d 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4103,34 +4103,32 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)
int err, i;
struct msix_entry hpsa_msix_entries[MAX_REPLY_QUEUES];

- for (i = 0; i < MAX_REPLY_QUEUES; i++) {
- hpsa_msix_entries[i].vector = 0;
- hpsa_msix_entries[i].entry = i;
- }
-
/* Some boards advertise MSI but don't really support it */
if ((h->board_id == 0x40700E11) || (h->board_id == 0x40800E11) ||
(h->board_id == 0x40820E11) || (h->board_id == 0x40830E11))
goto default_int_mode;
if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) {
dev_info(&h->pdev->dev, "MSIX\n");
+
+ err = pci_msix_table_size(h->pdev);
+ if (err < ARRAY_SIZE(hpsa_msix_entries))
+ goto default_int_mode;
+
+ for (i = 0; i < ARRAY_SIZE(hpsa_msix_entries); i++) {
+ hpsa_msix_entries[i].vector = 0;
+ hpsa_msix_entries[i].entry = i;
+ }
+
err = pci_enable_msix(h->pdev, hpsa_msix_entries,
- MAX_REPLY_QUEUES);
+ ARRAY_SIZE(hpsa_msix_entries));
if (!err) {
for (i = 0; i < MAX_REPLY_QUEUES; i++)
h->intr[i] = hpsa_msix_entries[i].vector;
h->msix_vector = 1;
return;
}
- if (err > 0) {
- dev_warn(&h->pdev->dev, "only %d MSI-X vectors "
- "available\n", err);
- goto default_int_mode;
- } else {
- dev_warn(&h->pdev->dev, "MSI-X init failed %d\n",
- err);
- goto default_int_mode;
- }
+ dev_warn(&h->pdev->dev, "MSI-X init failed %d\n", err);
+ goto default_int_mode;
}
if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
dev_info(&h->pdev->dev, "MSI\n");
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:29 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/brocade/bna/bnad.c | 34 ++++++++++++------------------
1 files changed, 14 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c
index b78e69e..d41257c 100644
--- a/drivers/net/ethernet/brocade/bna/bnad.c
+++ b/drivers/net/ethernet/brocade/bna/bnad.c
@@ -2469,21 +2469,11 @@ bnad_enable_msix(struct bnad *bnad)
if (bnad->msix_table)
return;

- bnad->msix_table =
- kcalloc(bnad->msix_num, sizeof(struct msix_entry), GFP_KERNEL);
-
- if (!bnad->msix_table)
+ ret = pci_msix_table_size(bnad->pcidev);
+ if (ret < 0)
goto intx_mode;

- for (i = 0; i < bnad->msix_num; i++)
- bnad->msix_table[i].entry = i;
-
- ret = pci_enable_msix(bnad->pcidev, bnad->msix_table, bnad->msix_num);
- if (ret > 0) {
- /* Not enough MSI-X vectors. */
- pr_warn("BNA: %d MSI-X vectors allocated < %d requested\n",
- ret, bnad->msix_num);
-
+ if (ret < bnad->msix_num) {
spin_lock_irqsave(&bnad->bna_lock, flags);
/* ret = #of vectors that we got */
bnad_q_num_adjust(bnad, (ret - BNAD_MAILBOX_MSIX_VECTORS) / 2,
@@ -2495,15 +2485,19 @@ bnad_enable_msix(struct bnad *bnad)

if (bnad->msix_num > ret)
goto intx_mode;
+ }

- /* Try once more with adjusted numbers */
- /* If this fails, fall back to INTx */
- ret = pci_enable_msix(bnad->pcidev, bnad->msix_table,
- bnad->msix_num);
- if (ret)
- goto intx_mode;
+ bnad->msix_table =
+ kcalloc(bnad->msix_num, sizeof(struct msix_entry), GFP_KERNEL);
+
+ if (!bnad->msix_table)
+ goto intx_mode;

- } else if (ret < 0)
+ for (i = 0; i < bnad->msix_num; i++)
+ bnad->msix_table[i].entry = i;
+
+ ret = pci_enable_msix(bnad->pcidev, bnad->msix_table, bnad->msix_num);
+ if (ret)
goto intx_mode;

pci_intx(bnad->pcidev, 0);
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:28 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/emulex/benet/be_main.c | 38 ++++++++++++++------------
1 files changed, 20 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 3e2c834..84d560d 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2366,29 +2366,23 @@ static int be_msix_enable(struct be_adapter *adapter)
else
num_vec = adapter->cfg_num_qs;

- for (i = 0; i < num_vec; i++)
- adapter->msix_entries[i].entry = i;
+ status = pci_msix_table_size(adapter->pdev);
+ if (status < 0)
+ goto fail;

- status = pci_enable_msix(adapter->pdev, adapter->msix_entries, num_vec);
- if (status == 0) {
- goto done;
- } else if (status >= MIN_MSIX_VECTORS) {
- num_vec = status;
- status = pci_enable_msix(adapter->pdev, adapter->msix_entries,
- num_vec);
- if (!status)
- goto done;
- } else (status > 0) {
+ num_vec = min(num_vec, status);
+ if (num_vec < MIN_MSIX_VECTORS) {
status = -ENOSPC;
+ goto fail;
}

- dev_warn(dev, "MSIx enable failed\n");
+ for (i = 0; i < num_vec; i++)
+ adapter->msix_entries[i].entry = i;
+
+ status = pci_enable_msix(adapter->pdev, adapter->msix_entries, num_vec);
+ if (status)
+ goto fail;

- /* INTx is not supported in VFs, so fail probe if enable_msix fails */
- if (!be_physfn(adapter))
- return status;
- return 0;
-done:
if (be_roce_supported(adapter) && num_vec > MIN_MSIX_VECTORS) {
adapter->num_msix_roce_vec = num_vec / 2;
dev_info(dev, "enabled %d MSI-x vector(s) for RoCE\n",
@@ -2400,6 +2394,14 @@ done:
dev_info(dev, "enabled %d MSI-x vector(s) for NIC\n",
adapter->num_msix_vec);
return 0;
+
+fail:
+ dev_warn(dev, "MSIx enable failed\n");
+
+ /* INTx is not supported in VFs, so fail probe if enable_msix fails */
+ if (!be_physfn(adapter))
+ return status;
+ return 0;
}

static inline int be_msix_vec_get(struct be_adapter *adapter,
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:53 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/ipr.c | 46 +++++++++++++++++++++++-----------------------
1 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 762a93e..86ed0a2 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9247,45 +9247,45 @@ static int ipr_enable_msix(struct ipr_ioa_cfg *ioa_cfg)
struct msix_entry entries[IPR_MAX_MSIX_VECTORS];
int i, err, vectors;

- for (i = 0; i < ARRAY_SIZE(entries); ++i)
- entries[i].entry = i;
+ err = pci_msix_table_size(ioa_cfg->pdev);
+ if (err < 0)
+ return err;

- vectors = ipr_number_of_msix;
+ vectors = min_t(int, err, ipr_number_of_msix);

- while ((err = pci_enable_msix(ioa_cfg->pdev, entries, vectors)) > 0)
- vectors = err;
+ BUG_ON(vectors > ARRAY_SIZE(entries));
+ for (i = 0; i < vectors; ++i)
+ entries[i].entry = i;

- if (err < 0)
+ err = pci_enable_msix(ioa_cfg->pdev, entries, vectors);
+ if (err)
return err;

- if (!err) {
- for (i = 0; i < vectors; i++)
- ioa_cfg->vectors_info[i].vec = entries[i].vector;
- ioa_cfg->nvectors = vectors;
- }
+ for (i = 0; i < vectors; i++)
+ ioa_cfg->vectors_info[i].vec = entries[i].vector;
+ ioa_cfg->nvectors = vectors;

- return err;
+ return 0;
}

static int ipr_enable_msi(struct ipr_ioa_cfg *ioa_cfg)
{
int i, err, vectors;

- vectors = ipr_number_of_msix;
-
- while ((err = pci_enable_msi_block(ioa_cfg->pdev, vectors)) > 0)
- vectors = err;
-
+ err = pci_get_msi_cap(ioa_cfg->pdev);
if (err < 0)
return err;

- if (!err) {
- for (i = 0; i < vectors; i++)
- ioa_cfg->vectors_info[i].vec = ioa_cfg->pdev->irq + i;
- ioa_cfg->nvectors = vectors;
- }
+ vectors = min_t(int, err, ipr_number_of_msix);
+ err = pci_enable_msi_block(ioa_cfg->pdev, vectors);
+ if (err)
+ return err;
+
+ for (i = 0; i < vectors; i++)
+ ioa_cfg->vectors_info[i].vec = ioa_cfg->pdev->irq + i;
+ ioa_cfg->nvectors = vectors;

- return err;
+ return 0;
}

static void name_msi_vectors(struct ipr_ioa_cfg *ioa_cfg)
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:22 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/qlogic/qlge/qlge_main.c | 39 +++++++++++--------------
1 files changed, 17 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
index ac54cb0..d6fdd93 100644
--- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
@@ -3258,45 +3258,40 @@ static void ql_enable_msix(struct ql_adapter *qdev)

/* Get the MSIX vectors. */
if (qlge_irq_type == MSIX_IRQ) {
+ err = pci_msix_table_size(qdev->pdev);
+ if (err < 0)
+ goto msix_fail;
+
+ qdev->intr_count = min_t(u32, qdev->intr_count, err);
+
/* Try to alloc space for the msix struct,
* if it fails then go to MSI/legacy.
*/
qdev->msi_x_entry = kcalloc(qdev->intr_count,
sizeof(struct msix_entry),
GFP_KERNEL);
- if (!qdev->msi_x_entry) {
- qlge_irq_type = MSI_IRQ;
- goto msi;
- }
+ if (!qdev->msi_x_entry)
+ goto msix_fail;

for (i = 0; i < qdev->intr_count; i++)
qdev->msi_x_entry[i].entry = i;

- /* Loop to get our vectors. We start with
- * what we want and settle for what we get.
- */
- do {
- err = pci_enable_msix(qdev->pdev,
- qdev->msi_x_entry, qdev->intr_count);
- if (err > 0)
- qdev->intr_count = err;
- } while (err > 0);
-
- if (err < 0) {
- kfree(qdev->msi_x_entry);
- qdev->msi_x_entry = NULL;
- netif_warn(qdev, ifup, qdev->ndev,
- "MSI-X Enable failed, trying MSI.\n");
- qlge_irq_type = MSI_IRQ;
- } else if (err == 0) {
+ if (!pci_enable_msix(qdev->pdev,
+ qdev->msi_x_entry, qdev->intr_count)) {
set_bit(QL_MSIX_ENABLED, &qdev->flags);
netif_info(qdev, ifup, qdev->ndev,
"MSI-X Enabled, got %d vectors.\n",
qdev->intr_count);
return;
}
+
+ kfree(qdev->msi_x_entry);
+ qdev->msi_x_entry = NULL;
+msix_fail:
+ netif_warn(qdev, ifup, qdev->ndev,
+ "MSI-X Enable failed, trying MSI.\n");
+ qlge_irq_type = MSI_IRQ;
}
-msi:
qdev->intr_count = 1;
if (qlge_irq_type == MSI_IRQ) {
if (!pci_enable_msi(qdev->pdev)) {
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:25 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/ata/ahci.c | 56 ++++++++++++++++++++++++++++++++-------------------
1 files changed, 35 insertions(+), 21 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 9d715ae..f1c8838 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1091,26 +1091,40 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
{}
#endif

-int ahci_init_interrupts(struct pci_dev *pdev, struct ahci_host_priv *hpriv)
+int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
+ struct ahci_host_priv *hpriv)
{
- int rc;
- unsigned int maxvec;
+ int rc, nvec;

- if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) {
- rc = pci_enable_msi_block_auto(pdev, &maxvec);
- if (rc > 0) {
- if ((rc == maxvec) || (rc == 1))
- return rc;
- /*
- * Assume that advantage of multipe MSIs is negated,
- * so fallback to single MSI mode to save resources
- */
- pci_disable_msi(pdev);
- if (!pci_enable_msi(pdev))
- return 1;
- }
- }
+ if (hpriv->flags & AHCI_HFLAG_NO_MSI)
+ goto intx;
+
+ rc = pci_get_msi_cap(pdev);
+ if (rc < 0)
+ goto intx;
+
+ /*
+ * If number of MSIs is less than number of ports then Sharing Last
+ * Message mode could be enforced. In this case assume that advantage
+ * of multipe MSIs is negated and use single MSI mode instead.
+ */
+ if (rc < n_ports)
+ goto single_msi;
+
+ nvec = rc;
+ rc = pci_enable_msi_block(pdev, nvec);
+ if (rc)
+ goto intx;

+ return nvec;
+
+single_msi:
+ rc = pci_enable_msi(pdev);
+ if (rc)
+ goto intx;
+ return 1;
+
+intx:
pci_intx(pdev, 1);
return 0;
}
@@ -1277,10 +1291,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)

hpriv->mmio = pcim_iomap_table(pdev)[ahci_pci_bar];

- n_msis = ahci_init_interrupts(pdev, hpriv);
- if (n_msis > 1)
- hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
-
/* save initial config */
ahci_pci_save_initial_config(pdev, hpriv);

@@ -1335,6 +1345,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));

+ n_msis = ahci_init_interrupts(pdev, n_ports, hpriv);
+ if (n_msis > 1)
+ hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
+
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
if (!host)
return -ENOMEM;
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:11 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/ntb/ntb_hw.c | 41 +++++++++++++----------------------------
drivers/ntb/ntb_hw.h | 2 --
2 files changed, 13 insertions(+), 30 deletions(-)

diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c
index eccd5e5..7776429 100644
--- a/drivers/ntb/ntb_hw.c
+++ b/drivers/ntb/ntb_hw.c
@@ -1032,23 +1032,26 @@ static int ntb_setup_msix(struct ntb_device *ndev)
struct msix_entry *msix;
int msix_entries;
int rc, i;
- u16 val;

- if (!pdev->msix_cap) {
- rc = -EIO;
+ rc = pci_msix_table_size(pdev);
+ if (rc < 0)
goto err;
- }

- rc = pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &val);
- if (rc)
+ /*
+ * On SNB, the link interrupt is always tied to 4th vector. If
+ * we can't get all 4, then we can't use MSI-X.
+ */
+ if ((rc < SNB_MSIX_CNT) && (ndev->hw_type != BWD_HW)) {
+ rc = -ENOSPC;
goto err;
-
- msix_entries = msix_table_size(val);
- if (msix_entries > ndev->limits.msix_cnt) {
+ }
+ if (rc > ndev->limits.msix_cnt) {
rc = -EINVAL;
goto err;
}

+ msix_entries = rc;
+
ndev->msix_entries = kmalloc(sizeof(struct msix_entry) * msix_entries,
GFP_KERNEL);
if (!ndev->msix_entries) {
@@ -1060,26 +1063,8 @@ static int ntb_setup_msix(struct ntb_device *ndev)
ndev->msix_entries[i].entry = i;

rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
- if (rc < 0)
+ if (rc)
goto err1;
- if (rc > 0) {
- /* On SNB, the link interrupt is always tied to 4th vector. If
- * we can't get all 4, then we can't use MSI-X.
- */
- if ((rc < SNB_MSIX_CNT) && (ndev->hw_type != BWD_HW)) {
- rc = -EIO;
- goto err1;
- }
-
- dev_warn(&pdev->dev,
- "Only %d MSI-X vectors. Limiting the number of queues to that number.\n",
- rc);
- msix_entries = rc;
-
- rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
- if (rc)
- goto err1;
- }

for (i = 0; i < msix_entries; i++) {
msix = &ndev->msix_entries[i];
diff --git a/drivers/ntb/ntb_hw.h b/drivers/ntb/ntb_hw.h
index 0a31ced..50bd760 100644
--- a/drivers/ntb/ntb_hw.h
+++ b/drivers/ntb/ntb_hw.h
@@ -60,8 +60,6 @@
#define PCI_DEVICE_ID_INTEL_NTB_SS_HSX 0x2F0F
#define PCI_DEVICE_ID_INTEL_NTB_B2B_BWD 0x0C4E

-#define msix_table_size(control) ((control & PCI_MSIX_FLAGS_QSIZE)+1)
-
#ifndef readq
static inline u64 readq(void __iomem *addr)
{
--
1.7.7.6
Jon Mason
2013-10-03 01:02:30 UTC
Permalink
Post by Alexander Gordeev
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.
---
drivers/ntb/ntb_hw.c | 41 +++++++++++++----------------------------
drivers/ntb/ntb_hw.h | 2 --
2 files changed, 13 insertions(+), 30 deletions(-)
diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c
index eccd5e5..7776429 100644
--- a/drivers/ntb/ntb_hw.c
+++ b/drivers/ntb/ntb_hw.c
@@ -1032,23 +1032,26 @@ static int ntb_setup_msix(struct ntb_device *ndev)
struct msix_entry *msix;
int msix_entries;
int rc, i;
- u16 val;
- if (!pdev->msix_cap) {
- rc = -EIO;
+ rc = pci_msix_table_size(pdev);
+ if (rc < 0)
goto err;
- }
- rc = pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &val);
- if (rc)
+ /*
+ * On SNB, the link interrupt is always tied to 4th vector. If
+ * we can't get all 4, then we can't use MSI-X.
+ */
+ if ((rc < SNB_MSIX_CNT) && (ndev->hw_type != BWD_HW)) {
Please check for the HW type first, and then compare to
ndev->limits.msix_cnt (which will be SNB_MSIX_CNT on SNB HW). Also,
put the comment inside the if statement and remove the unecessary "()"
around the comparisons. OCD on my part, but I like it that way.
Post by Alexander Gordeev
+ rc = -ENOSPC;
goto err;
-
- msix_entries = msix_table_size(val);
- if (msix_entries > ndev->limits.msix_cnt) {
+ }
else if...
Post by Alexander Gordeev
+ if (rc > ndev->limits.msix_cnt) {
rc = -EINVAL;
goto err;
}
+ msix_entries = rc;
+
ndev->msix_entries = kmalloc(sizeof(struct msix_entry) * msix_entries,
GFP_KERNEL);
if (!ndev->msix_entries) {
@@ -1060,26 +1063,8 @@ static int ntb_setup_msix(struct ntb_device *ndev)
ndev->msix_entries[i].entry = i;
rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
- if (rc < 0)
+ if (rc)
goto err1;
- if (rc > 0) {
- /* On SNB, the link interrupt is always tied to 4th vector. If
- * we can't get all 4, then we can't use MSI-X.
- */
- if ((rc < SNB_MSIX_CNT) && (ndev->hw_type != BWD_HW)) {
- rc = -EIO;
- goto err1;
- }
-
- dev_warn(&pdev->dev,
- "Only %d MSI-X vectors. Limiting the number of queues to that number.\n",
- rc);
- msix_entries = rc;
-
- rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
- if (rc)
- goto err1;
- }
for (i = 0; i < msix_entries; i++) {
msix = &ndev->msix_entries[i];
diff --git a/drivers/ntb/ntb_hw.h b/drivers/ntb/ntb_hw.h
index 0a31ced..50bd760 100644
--- a/drivers/ntb/ntb_hw.h
+++ b/drivers/ntb/ntb_hw.h
@@ -60,8 +60,6 @@
#define PCI_DEVICE_ID_INTEL_NTB_SS_HSX 0x2F0F
#define PCI_DEVICE_ID_INTEL_NTB_B2B_BWD 0x0C4E
-#define msix_table_size(control) ((control & PCI_MSIX_FLAGS_QSIZE)+1)
Good riddance! :-)
Post by Alexander Gordeev
-
#ifndef readq
static inline u64 readq(void __iomem *addr)
{
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:45 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
.../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 49 ++++++++++++--------
1 files changed, 29 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index 11cbce1..48bb33b 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -2437,13 +2437,10 @@ static void reduce_ethqs(struct adapter *adapter, int n)
*/
static int enable_msix(struct adapter *adapter)
{
- int i, err, want, need;
+ int i, err, want, need, nqsets;
struct msix_entry entries[MSIX_ENTRIES];
struct sge *s = &adapter->sge;

- for (i = 0; i < MSIX_ENTRIES; ++i)
- entries[i].entry = i;
-
/*
* We _want_ enough MSI-X interrupts to cover all of our "Queue Sets"
* plus those needed for our "extras" (for example, the firmware
@@ -2453,26 +2450,38 @@ static int enable_msix(struct adapter *adapter)
*/
want = s->max_ethqsets + MSIX_EXTRAS;
need = adapter->params.nports + MSIX_EXTRAS;
- while ((err = pci_enable_msix(adapter->pdev, entries, want)) >= need)
- want = err;

- if (err == 0) {
- int nqsets = want - MSIX_EXTRAS;
- if (nqsets < s->max_ethqsets) {
- dev_warn(adapter->pdev_dev, "only enough MSI-X vectors"
- " for %d Queue Sets\n", nqsets);
- s->max_ethqsets = nqsets;
- if (nqsets < s->ethqsets)
- reduce_ethqs(adapter, nqsets);
- }
- for (i = 0; i < want; ++i)
- adapter->msix_info[i].vec = entries[i].vector;
- } else if (err > 0) {
+ err = pci_msix_table_size(adapter->pdev);
+ if (err < 0)
+ return err;
+
+ want = min(want, err);
+ if (want < need) {
dev_info(adapter->pdev_dev, "only %d MSI-X vectors left,"
" not using MSI-X\n", err);
- err = -ENOSPC;
+ return -ENOSPC;
}
- return err;
+
+ BUG_ON(want > ARRAY_SIZE(entries));
+ for (i = 0; i < want; ++i)
+ entries[i].entry = i;
+
+ err = pci_enable_msix(adapter->pdev, entries, want);
+ if (err)
+ return err;
+
+ nqsets = want - MSIX_EXTRAS;
+ if (nqsets < s->max_ethqsets) {
+ dev_warn(adapter->pdev_dev, "only enough MSI-X vectors"
+ " for %d Queue Sets\n", nqsets);
+ s->max_ethqsets = nqsets;
+ if (nqsets < s->ethqsets)
+ reduce_ethqs(adapter, nqsets);
+ }
+ for (i = 0; i < want; ++i)
+ adapter->msix_info[i].vec = entries[i].vector;
+
+ return 0;
}

static const struct net_device_ops cxgb4vf_netdev_ops = {
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:19 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 56 ++++++++++++---------
1 files changed, 32 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index b94e679..a137c14 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -590,7 +590,37 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
adapter->flags &= ~(QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED);

if (adapter->ahw->msix_supported) {
- enable_msix:
+ err = pci_msix_table_size(pdev);
+ if (err < 0)
+ goto fail;
+
+ if (err < num_msix) {
+ dev_info(&pdev->dev,
+ "Unable to allocate %d MSI-X interrupt vectors\n",
+ num_msix);
+ if (qlcnic_83xx_check(adapter)) {
+ if (err < (QLC_83XX_MINIMUM_VECTOR - tx_vector))
+ return -ENOSPC;
+ err -= (max_tx_rings + 1);
+ num_msix = rounddown_pow_of_two(err);
+ num_msix += (max_tx_rings + 1);
+ } else {
+ num_msix = rounddown_pow_of_two(err);
+ if (qlcnic_check_multi_tx(adapter))
+ num_msix += max_tx_rings;
+ }
+
+ if (!num_msix) {
+ err = -ENOSPC;
+ goto fail;
+ }
+
+ dev_info(&pdev->dev,
+ "Trying to allocate %d MSI-X interrupt vectors\n",
+ num_msix);
+ }
+ }
+
for (i = 0; i < num_msix; i++)
adapter->msix_entries[i].entry = i;
err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
@@ -613,30 +643,8 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
adapter->max_sds_rings = max_sds_rings;
}
dev_info(&pdev->dev, "using msi-x interrupts\n");
- } else if (err > 0) {
- dev_info(&pdev->dev,
- "Unable to allocate %d MSI-X interrupt vectors\n",
- num_msix);
- if (qlcnic_83xx_check(adapter)) {
- if (err < (QLC_83XX_MINIMUM_VECTOR - tx_vector))
- return -ENOSPC;
- err -= (max_tx_rings + 1);
- num_msix = rounddown_pow_of_two(err);
- num_msix += (max_tx_rings + 1);
- } else {
- num_msix = rounddown_pow_of_two(err);
- if (qlcnic_check_multi_tx(adapter))
- num_msix += max_tx_rings;
- }
-
- if (num_msix) {
- dev_info(&pdev->dev,
- "Trying to allocate %d MSI-X interrupt vectors\n",
- num_msix);
- goto enable_msix;
- }
- err = -ENOSPC;
} else {
+fail:
dev_info(&pdev->dev,
"Unable to allocate %d MSI-X interrupt vectors\n",
num_msix);
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:42 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 62 +++++++++++++----------
1 files changed, 35 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 9425bc6..e5fbbd3 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -5699,9 +5699,6 @@ static int enable_msix(struct adapter *adap)
unsigned int nchan = adap->params.nports;
struct msix_entry entries[MAX_INGQ + 1];

- for (i = 0; i < ARRAY_SIZE(entries); ++i)
- entries[i].entry = i;
-
want = s->max_ethqsets + EXTRA_VECS;
if (is_offload(adap)) {
want += s->rdmaqs + s->ofldqsets;
@@ -5710,34 +5707,45 @@ static int enable_msix(struct adapter *adap)
}
need = adap->params.nports + EXTRA_VECS + ofld_need;

- while ((err = pci_enable_msix(adap->pdev, entries, want)) >= need)
- want = err;
+ err = pci_msix_table_size(adap->pdev);
+ if (err < 0)
+ return err;

- if (!err) {
- /*
- * Distribute available vectors to the various queue groups.
- * Every group gets its minimum requirement and NIC gets top
- * priority for leftovers.
- */
- i = want - EXTRA_VECS - ofld_need;
- if (i < s->max_ethqsets) {
- s->max_ethqsets = i;
- if (i < s->ethqsets)
- reduce_ethqs(adap, i);
- }
- if (is_offload(adap)) {
- i = want - EXTRA_VECS - s->max_ethqsets;
- i -= ofld_need - nchan;
- s->ofldqsets = (i / nchan) * nchan; /* round down */
- }
- for (i = 0; i < want; ++i)
- adap->msix_info[i].vec = entries[i].vector;
- } else if (err > 0) {
+ want = min(want, err);
+ if (want < need) {
dev_info(adap->pdev_dev,
"only %d MSI-X vectors left, not using MSI-X\n", err);
- err = -ENOSPC;
+ return -ENOSPC;
}
- return err;
+
+ BUG_ON(want > ARRAY_SIZE(entries));
+ for (i = 0; i < want; ++i)
+ entries[i].entry = i;
+
+ err = pci_enable_msix(adap->pdev, entries, want);
+ if (err)
+ return err;
+
+ /*
+ * Distribute available vectors to the various queue groups.
+ * Every group gets its minimum requirement and NIC gets top
+ * priority for leftovers.
+ */
+ i = want - EXTRA_VECS - ofld_need;
+ if (i < s->max_ethqsets) {
+ s->max_ethqsets = i;
+ if (i < s->ethqsets)
+ reduce_ethqs(adap, i);
+ }
+ if (is_offload(adap)) {
+ i = want - EXTRA_VECS - s->max_ethqsets;
+ i -= ofld_need - nchan;
+ s->ofldqsets = (i / nchan) * nchan; /* round down */
+ }
+ for (i = 0; i < want; ++i)
+ adap->msix_info[i].vec = entries[i].vector;
+
+ return 0;
}

#undef EXTRA_VECS
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:21 UTC
Permalink
Make pci_msix_table_size() to return a error code if the device
does not support MSI-X. This update is needed to facilitate a
forthcoming re-design MSI/MSI-X interrupts enabling pattern.

Device drivers will use this interface to obtain maximum number
of MSI-X interrupts the device supports and use that value in
the following call to pci_enable_msix() interface.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
Documentation/PCI/MSI-HOWTO.txt | 13 +++++++++++++
drivers/pci/msi.c | 5 ++++-
drivers/pci/pcie/portdrv_core.c | 2 ++
3 files changed, 19 insertions(+), 1 deletions(-)

diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index a091780..35b2d64 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -255,6 +255,19 @@ MSI-X Table. This address is mapped by the PCI subsystem, and should not
be accessed directly by the device driver. If the driver wishes to
mask or unmask an interrupt, it should call disable_irq() / enable_irq().

+4.3.4 pci_msix_table_size
+
+int pci_msix_table_size(struct pci_dev *dev)
+
+This function could be used to retrieve number of entries in the device
+MSI-X table.
+
+If this function returns a negative number, it indicates the device is
+not capable of sending MSI-Xs.
+
+If this function returns a positive number, it indicates the maximum
+number of MSI-X interrupt vectors that could be allocated.
+
4.4 Handling devices implementing both MSI and MSI-X capabilities

If a device implements both MSI and MSI-X capabilities, it can
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index b43f391..875c353 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -928,11 +928,12 @@ int pci_msix_table_size(struct pci_dev *dev)
u16 control;

if (!dev->msix_cap)
- return 0;
+ return -EINVAL;

pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control);
return msix_table_size(control);
}
+EXPORT_SYMBOL(pci_msix_table_size);

/**
* pci_enable_msix - configure device's MSI-X capability structure
@@ -962,6 +963,8 @@ int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
return status;

nr_entries = pci_msix_table_size(dev);
+ if (nr_entries < 0)
+ return nr_entries;
if (nvec > nr_entries)
return nr_entries;

diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index 31063ac..b4d86eb 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -80,6 +80,8 @@ static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask)
u32 reg32;

nr_entries = pci_msix_table_size(dev);
+ if (nr_entries < 0)
+ return nr_entries;
if (!nr_entries)
return -EINVAL;
if (nr_entries > PCIE_PORT_MAX_MSIX_ENTRIES)
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:31 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/vmxnet3/vmxnet3_drv.c | 68 ++++++++++++++++++-------------------
1 files changed, 33 insertions(+), 35 deletions(-)

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 00dc0d0..8d3321b 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2724,49 +2724,47 @@ vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac)

#ifdef CONFIG_PCI_MSI

-/*
- * Enable MSIx vectors.
- * Returns :
- * 0 on successful enabling of required vectors,
- * VMXNET3_LINUX_MIN_MSIX_VECT when only minimum number of vectors required
- * could be enabled.
- * number of vectors which can be enabled otherwise (this number is smaller
- * than VMXNET3_LINUX_MIN_MSIX_VECT)
- */
-
static int
vmxnet3_acquire_msix_vectors(struct vmxnet3_adapter *adapter,
int vectors)
{
- int err = -EINVAL, vector_threshold;
+ int err, vector_threshold;
+
vector_threshold = VMXNET3_LINUX_MIN_MSIX_VECT;
+ if (vectors < vector_threshold)
+ return -EINVAL;

- while (vectors >= vector_threshold) {
- err = pci_enable_msix(adapter->pdev, adapter->intr.msix_entries,
- vectors);
- if (!err) {
- adapter->intr.num_intrs = vectors;
- return 0;
- } else if (err < 0) {
- dev_err(&adapter->netdev->dev,
- "Failed to enable MSI-X, error: %d\n", err);
- return err;
- } else if (err < vector_threshold) {
- dev_info(&adapter->pdev->dev,
- "Number of MSI-Xs which can be allocated "
- "is lower than min threshold required.\n");
- return -ENOSPC;
- } else {
- /* If fails to enable required number of MSI-x vectors
- * try enabling minimum number of vectors required.
- */
- dev_err(&adapter->netdev->dev,
- "Failed to enable %d MSI-X, trying %d instead\n",
- vectors, vector_threshold);
- vectors = vector_threshold;
- }
+ err = pci_msix_table_size(adapter->pdev);
+ if (err < 0)
+ goto err_msix;
+ if (err < vector_threshold) {
+ dev_info(&adapter->pdev->dev,
+ "Number of MSI-X interrupts which can be allocated "
+ "is lower than min threshold required.\n");
+ return -ENOSPC;
+ }
+ if (err < vectors) {
+ /*
+ * If fails to enable required number of MSI-x vectors
+ * try enabling minimum number of vectors required.
+ */
+ dev_err(&adapter->netdev->dev,
+ "Failed to enable %d MSI-X, trying %d instead\n",
+ vectors, vector_threshold);
+ vectors = vector_threshold;
}

+ err = pci_enable_msix(adapter->pdev, adapter->intr.msix_entries,
+ vectors);
+ if (err)
+ goto err_msix;
+
+ adapter->intr.num_intrs = vectors;
+ return 0;
+
+err_msix:
+ dev_err(&adapter->netdev->dev,
+ "Failed to enable MSI-X, error: %d\n", err);
return err;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:54 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c | 62 +++++++++++++------------
1 files changed, 32 insertions(+), 30 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
index 90b4e10..2444a4d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -711,37 +711,39 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
* Right now, we simply care about how many we'll get; we'll
* set them up later while requesting irq's.
*/
- while (vectors >= vector_threshold) {
- err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
- vectors);
- if (!err) /* Success in acquiring all requested vectors. */
- break;
- else if (err < 0)
- vectors = 0; /* Nasty failure, quit now */
- else /* err == number of vectors we should try again with */
- vectors = err;
- }
+ err = pci_msix_table_size(adapter->pdev);
+ if (err < 0)
+ goto err_alloc_msix;

- if (vectors < vector_threshold) {
- /* Can't allocate enough MSI-X interrupts? Oh well.
- * This just means we'll go with either a single MSI
- * vector or fall back to legacy interrupts.
- */
- netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
- "Unable to allocate MSI-X interrupts\n");
- adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
- } else {
- adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */
- /*
- * Adjust for only the vectors we'll use, which is minimum
- * of max_msix_q_vectors + NON_Q_VECTORS, or the number of
- * vectors we were allocated.
- */
- vectors -= NON_Q_VECTORS;
- adapter->num_q_vectors = min(vectors, adapter->max_q_vectors);
- }
+ vectors = min(vectors, err);
+ if (vectors < vector_threshold)
+ goto err_alloc_msix;
+
+ err = pci_enable_msix(adapter->pdev, adapter->msix_entries, vectors);
+ if (err)
+ goto err_alloc_msix;
+
+ adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */
+ /*
+ * Adjust for only the vectors we'll use, which is minimum
+ * of max_msix_q_vectors + NON_Q_VECTORS, or the number of
+ * vectors we were allocated.
+ */
+ vectors -= NON_Q_VECTORS;
+ adapter->num_q_vectors = min(vectors, adapter->max_q_vectors);
+
+ return;
+
+err_alloc_msix:
+ /* Can't allocate enough MSI-X interrupts? Oh well.
+ * This just means we'll go with either a single MSI
+ * vector or fall back to legacy interrupts.
+ */
+ netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
+ "Unable to allocate MSI-X interrupts\n");
+ adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
}

static void ixgbe_add_ring(struct ixgbe_ring *ring,
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:30 UTC
Permalink
As result of recent re-design of the MSI/MSI-X interrupts enabling
pattern this driver has to be updated to use the new technique to
obtain a optimal number of MSI/MSI-X interrupts required.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 54 ++++++++++-------------
1 files changed, 23 insertions(+), 31 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 61726af..edf31d2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -1564,7 +1564,7 @@ void bnx2x_free_irq(struct bnx2x *bp)

int bnx2x_enable_msix(struct bnx2x *bp)
{
- int msix_vec = 0, i, rc;
+ int msix_vec = 0, nvec, i, rc;

/* VFs don't have a default status block */
if (IS_PF(bp)) {
@@ -1590,60 +1590,52 @@ int bnx2x_enable_msix(struct bnx2x *bp)
msix_vec++;
}

+ rc = pci_msix_table_size(bp->pdev);
+ if (rc < 0)
+ goto no_msix;
+
+ nvec = min(msix_vec, rc);
+ if (nvec < BNX2X_MIN_MSIX_VEC_CNT(bp))
+ nvec = 1;
+
DP(BNX2X_MSG_SP, "about to request enable msix with %d vectors\n",
msix_vec);

- rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], msix_vec);
+ rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], nvec);
+ if (rc)
+ goto no_msix;

/*
* reconfigure number of tx/rx queues according to available
* MSI-X vectors
*/
- if (rc >= BNX2X_MIN_MSIX_VEC_CNT(bp)) {
- /* how less vectors we will have? */
- int diff = msix_vec - rc;
-
- BNX2X_DEV_INFO("Trying to use less MSI-X vectors: %d\n", rc);
+ if (nvec == 1) {
+ bp->flags |= USING_SINGLE_MSIX_FLAG;

- rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], rc);
+ bp->num_ethernet_queues = 1;
+ bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
+ } else if (nvec < msix_vec) {
+ /* how less vectors we will have? */
+ int diff = msix_vec - nvec;

- if (rc) {
- BNX2X_DEV_INFO("MSI-X is not attainable rc %d\n", rc);
- goto no_msix;
- }
/*
* decrease number of queues by number of unallocated entries
*/
bp->num_ethernet_queues -= diff;
bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
+ }

+ if (nvec != msix_vec)
BNX2X_DEV_INFO("New queue configuration set: %d\n",
bp->num_queues);
- } else if (rc > 0) {
- /* Get by with single vector */
- rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], 1);
- if (rc) {
- BNX2X_DEV_INFO("Single MSI-X is not attainable rc %d\n",
- rc);
- goto no_msix;
- }
-
- BNX2X_DEV_INFO("Using single MSI-X vector\n");
- bp->flags |= USING_SINGLE_MSIX_FLAG;
-
- BNX2X_DEV_INFO("set number of queues to 1\n");
- bp->num_ethernet_queues = 1;
- bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
- } else if (rc < 0) {
- BNX2X_DEV_INFO("MSI-X is not attainable rc %d\n", rc);
- goto no_msix;
- }

bp->flags |= USING_MSIX_FLAG;

return 0;

no_msix:
+ BNX2X_DEV_INFO("MSI-X is not attainable rc %d\n", rc);
+
/* fall to INTx if not enough memory */
if (rc == -ENOMEM)
bp->flags |= DISABLE_MSI_FLAG;
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:22 UTC
Permalink
This update is needed to facilitate a forthcoming re-design
MSI/MSI-X interrupts enabling pattern.

Device drivers will use this interface to obtain maximum number
of MSI interrupts the device supports and use that value in the
following call to pci_enable_msi_block() interface.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
Documentation/PCI/MSI-HOWTO.txt | 15 +++++++++++++++
drivers/pci/msi.c | 33 +++++++++++++++++++++------------
include/linux/pci.h | 6 ++++++
3 files changed, 42 insertions(+), 12 deletions(-)

diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index 35b2d64..1f37ce2 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -169,6 +169,21 @@ on any interrupt for which it previously called request_irq().
Failure to do so results in a BUG_ON(), leaving the device with
MSI enabled and thus leaking its vector.

+4.2.5 pci_get_msi_cap
+
+int pci_get_msi_cap(struct pci_dev *dev)
+
+This function could be used to retrieve the number of MSI vectors the
+device requested (via the Multiple Message Capable register). The MSI
+specification only allows the returned value to be a power of two,
+up to a maximum of 2^5 (32).
+
+If this function returns a negative number, it indicates the device is
+not capable of sending MSIs.
+
+If this function returns a positive number, it indicates the maximum
+number of MSI interrupt vectors that could be allocated.
+
4.3 Using MSI-X

The MSI-X capability is much more flexible than the MSI capability.
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 875c353..ca59bfc 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -812,6 +812,21 @@ static int pci_msi_check_device(struct pci_dev *dev, int nvec, int type)
return 0;
}

+int pci_get_msi_cap(struct pci_dev *dev)
+{
+ int ret;
+ u16 msgctl;
+
+ if (!dev->msi_cap)
+ return -EINVAL;
+
+ pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl);
+ ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
+
+ return ret;
+}
+EXPORT_SYMBOL(pci_get_msi_cap);
+
/**
* pci_enable_msi_block - configure device's MSI capability structure
* @dev: device to configure
@@ -828,13 +843,10 @@ static int pci_msi_check_device(struct pci_dev *dev, int nvec, int type)
int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
{
int status, maxvec;
- u16 msgctl;

- if (!dev->msi_cap)
- return -EINVAL;
-
- pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl);
- maxvec = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
+ maxvec = pci_get_msi_cap(dev);
+ if (maxvec < 0)
+ return maxvec;
if (nvec > maxvec)
return maxvec;

@@ -859,13 +871,10 @@ EXPORT_SYMBOL(pci_enable_msi_block);
int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
{
int ret, nvec;
- u16 msgctl;

- if (!dev->msi_cap)
- return -EINVAL;
-
- pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl);
- ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1);
+ ret = pci_get_msi_cap(dev);
+ if (ret < 0)
+ return ret;

if (maxvec)
*maxvec = ret;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index da172f9..2fa92ef 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1144,6 +1144,11 @@ struct msix_entry {


#ifndef CONFIG_PCI_MSI
+static inline int pci_get_msi_cap(struct pci_dev *dev)
+{
+ return -1;
+}
+
static inline int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
{
return -1;
@@ -1185,6 +1190,7 @@ static inline int pci_msi_enabled(void)
return 0;
}
#else
+int pci_get_msi_cap(struct pci_dev *dev);
int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec);
int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec);
void pci_msi_shutdown(struct pci_dev *dev);
--
1.7.7.6
Ben Hutchings
2013-10-03 21:52:54 UTC
Permalink
On Wed, 2013-10-02 at 12:48 +0200, Alexander Gordeev wrote:
[...]
Post by Alexander Gordeev
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -812,6 +812,21 @@ static int pci_msi_check_device(struct pci_dev *dev, int nvec, int type)
return 0;
}
+int pci_get_msi_cap(struct pci_dev *dev)
+{
+ int ret;
+ u16 msgctl;
+
+ if (!dev->msi_cap)
+ return -EINVAL;
[...]
Post by Alexander Gordeev
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1144,6 +1144,11 @@ struct msix_entry {
#ifndef CONFIG_PCI_MSI
+static inline int pci_get_msi_cap(struct pci_dev *dev)
+{
+ return -1;
[...]

Shouldn't this also return -EINVAL?

Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Alexander Gordeev
2013-10-04 05:13:24 UTC
Permalink
Post by Ben Hutchings
Post by Alexander Gordeev
#ifndef CONFIG_PCI_MSI
+static inline int pci_get_msi_cap(struct pci_dev *dev)
+{
+ return -1;
[...]
Shouldn't this also return -EINVAL?
Yep, all inliners here are better to return -EINVAL.
Will do unless someone speaks out against.
Post by Ben Hutchings
Ben.
--
Regards,
Alexander Gordeev
***@redhat.com
Alexander Gordeev
2013-10-02 10:48:24 UTC
Permalink
As result of recent re-design of MSI/MSI-X interrupts enabling
pattern pci_enable_msi_block_auto() interface became obsolete.

To enable maximum number of MSI interrupts for a device the
driver will first obtain that number from pci_get_msi_cap()
function and then call pci_enable_msi_block() interface.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
Documentation/PCI/MSI-HOWTO.txt | 30 ++----------------------------
drivers/pci/msi.c | 20 --------------------
include/linux/pci.h | 7 -------
3 files changed, 2 insertions(+), 55 deletions(-)

diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index 40abcfb..4d0525f 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -133,33 +133,7 @@ static int foo_driver_enable_msi(struct foo_adapter *adapter, int nvec)
return rc;
}

-4.2.3 pci_enable_msi_block_auto
-
-int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *count)
-
-This variation on pci_enable_msi() call allows a device driver to request
-the maximum possible number of MSIs. The MSI specification only allows
-interrupts to be allocated in powers of two, up to a maximum of 2^5 (32).
-
-If this function returns a positive number, it indicates that it has
-succeeded and the returned value is the number of allocated interrupts. In
-this case, the function enables MSI on this device and updates dev->irq to
-be the lowest of the new interrupts assigned to it. The other interrupts
-assigned to the device are in the range dev->irq to dev->irq + returned
-value - 1.
-
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to request any more MSI interrupts for
-this device.
-
-If the device driver needs to know the number of interrupts the device
-supports it can pass the pointer count where that number is stored. The
-device driver must decide what action to take if pci_enable_msi_block_auto()
-succeeds, but returns a value less than the number of interrupts supported.
-If the device driver does not need to know the number of interrupts
-supported, it can set the pointer count to NULL.
-
-4.2.4 pci_disable_msi
+4.2.3 pci_disable_msi

void pci_disable_msi(struct pci_dev *dev)

@@ -175,7 +149,7 @@ on any interrupt for which it previously called request_irq().
Failure to do so results in a BUG_ON(), leaving the device with
MSI enabled and thus leaking its vector.

-4.2.5 pci_get_msi_cap
+4.2.4 pci_get_msi_cap

int pci_get_msi_cap(struct pci_dev *dev)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 583ace1..1934519 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -849,26 +849,6 @@ int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
}
EXPORT_SYMBOL(pci_enable_msi_block);

-int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
-{
- int ret, nvec;
-
- ret = pci_get_msi_cap(dev);
- if (ret < 0)
- return ret;
-
- if (maxvec)
- *maxvec = ret;
-
- nvec = ret;
- ret = pci_enable_msi_block(dev, nvec);
- if (ret)
- return ret;
-
- return nvec;
-}
-EXPORT_SYMBOL(pci_enable_msi_block_auto);
-
void pci_msi_shutdown(struct pci_dev *dev)
{
struct msi_desc *desc;
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 2fa92ef..13bf88d 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1154,12 +1154,6 @@ static inline int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
return -1;
}

-static inline int
-pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
-{
- return -1;
-}
-
static inline void pci_msi_shutdown(struct pci_dev *dev)
{ }
static inline void pci_disable_msi(struct pci_dev *dev)
@@ -1192,7 +1186,6 @@ static inline int pci_msi_enabled(void)
#else
int pci_get_msi_cap(struct pci_dev *dev);
int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec);
-int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec);
void pci_msi_shutdown(struct pci_dev *dev);
void pci_disable_msi(struct pci_dev *dev);
int pci_msix_table_size(struct pci_dev *dev);
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:20 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 112 +++++++++++-----------
1 files changed, 56 insertions(+), 56 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index a137c14..8510457 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -568,7 +568,7 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
{
struct pci_dev *pdev = adapter->pdev;
int max_tx_rings, max_sds_rings, tx_vector;
- int err = -EINVAL, i;
+ int err, i;

if (adapter->flags & QLCNIC_TX_INTR_SHARED) {
max_tx_rings = 0;
@@ -589,68 +589,68 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
adapter->max_sds_rings = 1;
adapter->flags &= ~(QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED);

- if (adapter->ahw->msix_supported) {
- err = pci_msix_table_size(pdev);
- if (err < 0)
+ if (!adapter->ahw->msix_supported)
+ return -EINVAL;
+
+ err = pci_msix_table_size(pdev);
+ if (err < 0)
+ goto fail;
+
+ if (err < num_msix) {
+ dev_info(&pdev->dev,
+ "Unable to allocate %d MSI-X interrupt vectors\n",
+ num_msix);
+ if (qlcnic_83xx_check(adapter)) {
+ if (err < (QLC_83XX_MINIMUM_VECTOR - tx_vector))
+ return -ENOSPC;
+ err -= (max_tx_rings + 1);
+ num_msix = rounddown_pow_of_two(err);
+ num_msix += (max_tx_rings + 1);
+ } else {
+ num_msix = rounddown_pow_of_two(err);
+ if (qlcnic_check_multi_tx(adapter))
+ num_msix += max_tx_rings;
+ }
+
+ if (!num_msix) {
+ err = -ENOSPC;
goto fail;
+ }

- if (err < num_msix) {
- dev_info(&pdev->dev,
- "Unable to allocate %d MSI-X interrupt vectors\n",
- num_msix);
- if (qlcnic_83xx_check(adapter)) {
- if (err < (QLC_83XX_MINIMUM_VECTOR - tx_vector))
- return -ENOSPC;
- err -= (max_tx_rings + 1);
- num_msix = rounddown_pow_of_two(err);
- num_msix += (max_tx_rings + 1);
- } else {
- num_msix = rounddown_pow_of_two(err);
- if (qlcnic_check_multi_tx(adapter))
- num_msix += max_tx_rings;
- }
+ dev_info(&pdev->dev,
+ "Trying to allocate %d MSI-X interrupt vectors\n",
+ num_msix);
+ }

- if (!num_msix) {
- err = -ENOSPC;
- goto fail;
- }
+ for (i = 0; i < num_msix; i++)
+ adapter->msix_entries[i].entry = i;

- dev_info(&pdev->dev,
- "Trying to allocate %d MSI-X interrupt vectors\n",
- num_msix);
- }
- }
+ err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
+ if (err)
+ goto fail;

- for (i = 0; i < num_msix; i++)
- adapter->msix_entries[i].entry = i;
- err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
- if (err == 0) {
- adapter->flags |= QLCNIC_MSIX_ENABLED;
- if (qlcnic_83xx_check(adapter)) {
- adapter->ahw->num_msix = num_msix;
- /* subtract mail box and tx ring vectors */
- adapter->max_sds_rings = num_msix -
- max_tx_rings - 1;
- } else {
- adapter->ahw->num_msix = num_msix;
- if (qlcnic_check_multi_tx(adapter) &&
- !adapter->ahw->diag_test &&
- (adapter->max_drv_tx_rings > 1))
- max_sds_rings = num_msix - max_tx_rings;
- else
- max_sds_rings = num_msix;
-
- adapter->max_sds_rings = max_sds_rings;
- }
- dev_info(&pdev->dev, "using msi-x interrupts\n");
- } else {
-fail:
- dev_info(&pdev->dev,
- "Unable to allocate %d MSI-X interrupt vectors\n",
- num_msix);
- }
+ adapter->flags |= QLCNIC_MSIX_ENABLED;
+ if (qlcnic_83xx_check(adapter)) {
+ adapter->ahw->num_msix = num_msix;
+ /* subtract mail box and tx ring vectors */
+ adapter->max_sds_rings = num_msix - max_tx_rings - 1;
+ } else {
+ adapter->ahw->num_msix = num_msix;
+ if (qlcnic_check_multi_tx(adapter) &&
+ !adapter->ahw->diag_test && (adapter->max_drv_tx_rings > 1))
+ max_sds_rings = num_msix - max_tx_rings;
+ else
+ max_sds_rings = num_msix;
+
+ adapter->max_sds_rings = max_sds_rings;
}

+ dev_info(&pdev->dev, "using msi-x interrupts\n");
+ return 0;
+
+fail:
+ dev_info(&pdev->dev,
+ "Unable to allocate %d MSI-X interrupt vectors\n", num_msix);
return err;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:49 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/dma/ioat/dma.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index 5ff6fc1..acee3b2 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -937,6 +937,7 @@ msix:
chan = ioat_chan_by_index(device, j);
devm_free_irq(dev, msix->vector, chan);
}
+ pci_disable_msix(pdev);
goto msix_single_vector;
}
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:36 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/csiostor/csio_isr.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/scsi/csiostor/csio_isr.c b/drivers/scsi/csiostor/csio_isr.c
index 91ba91d..abf20ab 100644
--- a/drivers/scsi/csiostor/csio_isr.c
+++ b/drivers/scsi/csiostor/csio_isr.c
@@ -533,7 +533,7 @@ csio_enable_msix(struct csio_hw *hw)
csio_info(hw, "Not using MSI-X, remainder:%d\n", rv);

kfree(entries);
- return -ENOMEM;
+ return -ENOSPC;
}

/* Save off vectors */
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:03 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/mellanox/mlx5/core/main.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index b47739b..3573ba4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -142,6 +142,7 @@ retry:
}

mlx5_core_dbg(dev, "received %d MSI vectors out of %d requested\n", err, nvec);
+ kfree(table->msix_arr);

return 0;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:28 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/vmxnet3/vmxnet3_drv.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 5b8ea71..3518173 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2750,7 +2750,7 @@ vmxnet3_acquire_msix_vectors(struct vmxnet3_adapter *adapter,
} else if (err < 0) {
dev_err(&adapter->netdev->dev,
"Failed to enable MSI-X, error: %d\n", err);
- vectors = 0;
+ return err;
} else if (err < vector_threshold) {
break;
} else {
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:10 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/ntb/ntb_hw.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c
index de2062c..eccd5e5 100644
--- a/drivers/ntb/ntb_hw.c
+++ b/drivers/ntb/ntb_hw.c
@@ -1066,7 +1066,7 @@ static int ntb_setup_msix(struct ntb_device *ndev)
/* On SNB, the link interrupt is always tied to 4th vector. If
* we can't get all 4, then we can't use MSI-X.
*/
- if (ndev->hw_type != BWD_HW) {
+ if ((rc < SNB_MSIX_CNT) && (ndev->hw_type != BWD_HW)) {
rc = -EIO;
goto err1;
}
--
1.7.7.6
Jon Mason
2013-10-03 00:48:05 UTC
Permalink
Post by Alexander Gordeev
---
drivers/ntb/ntb_hw.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c
index de2062c..eccd5e5 100644
--- a/drivers/ntb/ntb_hw.c
+++ b/drivers/ntb/ntb_hw.c
@@ -1066,7 +1066,7 @@ static int ntb_setup_msix(struct ntb_device *ndev)
/* On SNB, the link interrupt is always tied to 4th vector. If
* we can't get all 4, then we can't use MSI-X.
*/
- if (ndev->hw_type != BWD_HW) {
+ if ((rc < SNB_MSIX_CNT) && (ndev->hw_type != BWD_HW)) {
Nack, this check is unnecessary.

Also, no comment in the commit on why it could be necessary.
Post by Alexander Gordeev
rc = -EIO;
goto err1;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:46 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/hpsa.c | 6 +++++-
1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 891c86b..393c8db 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4141,7 +4141,11 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)
}
default_int_mode:
#endif /* CONFIG_PCI_MSI */
- /* if we get here we're going to use the default interrupt mode */
+ /*
+ * If we get here we're going to use either the
+ * default interrupt mode or single MSI mode
+ */
+
h->intr[h->intr_mode] = h->pdev->irq;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:39 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
index 9bd3099..915729c 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
@@ -3099,7 +3099,7 @@ static int cxgb_enable_msix(struct adapter *adap)

if (!err && vectors < (adap->params.nports + 1)) {
pci_disable_msix(adap->pdev);
- err = -1;
+ err = -ENOSPC;
}

if (!err) {
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:35 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/csiostor/csio_isr.c | 4 +---
1 files changed, 1 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/csiostor/csio_isr.c b/drivers/scsi/csiostor/csio_isr.c
index 7ee9777..91ba91d 100644
--- a/drivers/scsi/csiostor/csio_isr.c
+++ b/drivers/scsi/csiostor/csio_isr.c
@@ -529,10 +529,8 @@ csio_enable_msix(struct csio_hw *hw)
csio_reduce_sqsets(hw, cnt - extra);
}
} else {
- if (rv > 0) {
- pci_disable_msix(hw->pdev);
+ if (rv > 0)
csio_info(hw, "Not using MSI-X, remainder:%d\n", rv);
- }

kfree(entries);
return -ENOMEM;
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:52 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/ipr.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index fb57e21..762a93e 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9527,7 +9527,7 @@ static int ipr_probe_ioa(struct pci_dev *pdev,
ipr_number_of_msix = IPR_MAX_MSIX_VECTORS;
}

- if (ioa_cfg->ipr_chip->intr_type == IPR_USE_MSI &&
+ if (ioa_cfg->ipr_chip->intr_type == IPR_USE_MSIX &&
ipr_enable_msix(ioa_cfg) == 0)
ioa_cfg->intr_flag = IPR_USE_MSIX;
else if (ioa_cfg->ipr_chip->intr_type == IPR_USE_MSI &&
--
1.7.7.6
Brian King
2013-10-02 19:31:25 UTC
Permalink
Post by Alexander Gordeev
---
drivers/scsi/ipr.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index fb57e21..762a93e 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9527,7 +9527,7 @@ static int ipr_probe_ioa(struct pci_dev *pdev,
ipr_number_of_msix = IPR_MAX_MSIX_VECTORS;
}
- if (ioa_cfg->ipr_chip->intr_type == IPR_USE_MSI &&
+ if (ioa_cfg->ipr_chip->intr_type == IPR_USE_MSIX &&
ipr_enable_msix(ioa_cfg) == 0)
ioa_cfg->intr_flag = IPR_USE_MSIX;
else if (ioa_cfg->ipr_chip->intr_type == IPR_USE_MSI &&
Nack. ioa_cfg->ipr_chip->intr_type gets initialized from the ipr_chip table
at the top of the driver which never sets intr_type to IPR_USE_MSIX, so this
will break MSI-X support for ipr.

We indicate at the chip level only whether we want to force LSI or whether
we want to enable MSI / MSI-X and then try enabling MSI-X and fall back to
MSI if MSI-X is not available or does not work. We then set intr_flag to indicate
what we are actually using on the specific adapter.

Thanks,

Brian
--
Brian King
Power Linux I/O
IBM Linux Technology Center


--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Alexander Gordeev
2013-10-02 10:48:18 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
arch/powerpc/platforms/pseries/msi.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 6d2f0ab..009ec73 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -467,7 +467,7 @@ again:
list_for_each_entry(entry, &pdev->msi_list, list) {
hwirq = rtas_query_irq_number(pdn, i++);
if (hwirq < 0) {
- pr_debug("rtas_msi: error (%d) getting hwirq\n", rc);
+ pr_debug("rtas_msi: error (%d) getting hwirq\n", hwirq);
return hwirq;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:27 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/vmxnet3/vmxnet3_drv.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 7e2788c..5b8ea71 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2738,7 +2738,7 @@ static int
vmxnet3_acquire_msix_vectors(struct vmxnet3_adapter *adapter,
int vectors)
{
- int err = 0, vector_threshold;
+ int err = -EINVAL, vector_threshold;
vector_threshold = VMXNET3_LINUX_MIN_MSIX_VECT;

while (vectors >= vector_threshold) {
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:33 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/block/cciss.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 80068a0..bf11540 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4103,7 +4103,10 @@ static void cciss_interrupt_mode(ctlr_info_t *h)
}
default_int_mode:
#endif /* CONFIG_PCI_MSI */
- /* if we get here we're going to use the default interrupt mode */
+ /*
+ * If we get here we're going to use either the
+ * default interrupt mode or single MSI mode
+ */
h->intr[h->intr_mode] = h->pdev->irq;
return;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:55 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index 59a62bb..fa0537a 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -1773,7 +1773,7 @@ static int ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
}

if (vectors < vector_threshold)
- err = -ENOMEM;
+ err = -ENOSPC;

if (err) {
dev_err(&adapter->pdev->dev,
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:44 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
.../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index 87a82fc..11cbce1 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -2470,6 +2470,7 @@ static int enable_msix(struct adapter *adapter)
} else if (err > 0) {
dev_info(adapter->pdev_dev, "only %d MSI-X vectors left,"
" not using MSI-X\n", err);
+ err = -ENOSPC;
}
return err;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:21 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/qlogic/qlge/qlge_main.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlge/qlge_main.c b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
index 2553cf4..ac54cb0 100644
--- a/drivers/net/ethernet/qlogic/qlge/qlge_main.c
+++ b/drivers/net/ethernet/qlogic/qlge/qlge_main.c
@@ -3287,7 +3287,6 @@ static void ql_enable_msix(struct ql_adapter *qdev)
qdev->msi_x_entry = NULL;
netif_warn(qdev, ifup, qdev->ndev,
"MSI-X Enable failed, trying MSI.\n");
- qdev->intr_count = 1;
qlge_irq_type = MSI_IRQ;
} else if (err == 0) {
set_bit(QL_MSIX_ENABLED, &qdev->flags);
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:17 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index c6018bb..ff6a78b 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -568,7 +568,7 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
{
struct pci_dev *pdev = adapter->pdev;
int max_tx_rings, max_sds_rings, tx_vector;
- int err = -1, i;
+ int err = -EINVAL, i;

if (adapter->flags & QLCNIC_TX_INTR_SHARED) {
max_tx_rings = 0;
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:18 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index ff6a78b..b94e679 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -613,7 +613,6 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
adapter->max_sds_rings = max_sds_rings;
}
dev_info(&pdev->dev, "using msi-x interrupts\n");
- return err;
} else if (err > 0) {
dev_info(&pdev->dev,
"Unable to allocate %d MSI-X interrupt vectors\n",
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:20 UTC
Permalink
arch_setup_msi_irqs() hook can only be called from the generic
MSI code which ensures correct MSI type parameter.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
arch/s390/pci/pci.c | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index c79c6e4..61a3c2c 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -425,8 +425,6 @@ int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
int rc;

pr_debug("%s: requesting %d MSI-X interrupts...", __func__, nvec);
- if (type != PCI_CAP_ID_MSIX && type != PCI_CAP_ID_MSI)
- return -EINVAL;
if (type == PCI_CAP_ID_MSI && nvec > 1)
return 1;
msi_vecs = min(nvec, ZPCI_MSI_VEC_MAX);
--
1.7.7.6
Greg KH
2013-10-02 18:17:49 UTC
Permalink
Post by Alexander Gordeev
arch_setup_msi_irqs() hook can only be called from the generic
MSI code which ensures correct MSI type parameter.
---
arch/s390/pci/pci.c | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
I have no idea why you sent the stable@ alias so many patches, all in
the incorrect form for them to be ever accepted in the stable kernel
releases. Please read Documentation/stable_kernel_rules.txt for how to
do this properly.

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Martin Schwidefsky
2013-10-04 07:40:53 UTC
Permalink
On Wed, 2 Oct 2013 12:48:20 +0200
Post by Alexander Gordeev
arch_setup_msi_irqs() hook can only be called from the generic
MSI code which ensures correct MSI type parameter.
---
arch/s390/pci/pci.c | 2 --
1 files changed, 0 insertions(+), 2 deletions(-)
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index c79c6e4..61a3c2c 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -425,8 +425,6 @@ int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
int rc;
pr_debug("%s: requesting %d MSI-X interrupts...", __func__, nvec);
- if (type != PCI_CAP_ID_MSIX && type != PCI_CAP_ID_MSI)
- return -EINVAL;
if (type == PCI_CAP_ID_MSI && nvec > 1)
return 1;
msi_vecs = min(nvec, ZPCI_MSI_VEC_MAX);
Acked-by: Martin Schwidefsky <***@de.ibm.com>
--
blue skies,
Martin.

"Reality continues to ruin my life." - Calvin.
Alexander Gordeev
2013-10-02 10:48:38 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c | 3 ---
1 files changed, 0 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
index b650951..9bd3099 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c
@@ -3097,9 +3097,6 @@ static int cxgb_enable_msix(struct adapter *adap)
while ((err = pci_enable_msix(adap->pdev, entries, vectors)) > 0)
vectors = err;

- if (err < 0)
- pci_disable_msix(adap->pdev);
-
if (!err && vectors < (adap->params.nports + 1)) {
pci_disable_msix(adap->pdev);
err = -1;
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:41 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index c73cabd..9425bc6 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -5732,9 +5732,11 @@ static int enable_msix(struct adapter *adap)
}
for (i = 0; i < want; ++i)
adap->msix_info[i].vec = entries[i].vector;
- } else if (err > 0)
+ } else if (err > 0) {
dev_info(adap->pdev_dev,
"only %d MSI-X vectors left, not using MSI-X\n", err);
+ err = -ENOSPC;
+ }
return err;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:43 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
.../net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
index 40c22e7..87a82fc 100644
--- a/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
@@ -2468,7 +2468,6 @@ static int enable_msix(struct adapter *adapter)
for (i = 0; i < want; ++i)
adapter->msix_info[i].vec = entries[i].vector;
} else if (err > 0) {
- pci_disable_msix(adapter->pdev);
dev_info(adapter->pdev_dev, "only %d MSI-X vectors left,"
" not using MSI-X\n", err);
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:19 UTC
Permalink
Multiple MSIs have never been supported on s390 architecture,
but the platform code fails to report single MSI only.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
arch/s390/pci/pci.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index f17a834..c79c6e4 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -427,6 +427,8 @@ int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
pr_debug("%s: requesting %d MSI-X interrupts...", __func__, nvec);
if (type != PCI_CAP_ID_MSIX && type != PCI_CAP_ID_MSI)
return -EINVAL;
+ if (type == PCI_CAP_ID_MSI && nvec > 1)
+ return 1;
msi_vecs = min(nvec, ZPCI_MSI_VEC_MAX);
msi_vecs = min_t(unsigned int, msi_vecs, CONFIG_PCI_NR_MSI);
--
1.7.7.6
Martin Schwidefsky
2013-10-04 07:39:56 UTC
Permalink
On Wed, 2 Oct 2013 12:48:19 +0200
Post by Alexander Gordeev
Multiple MSIs have never been supported on s390 architecture,
but the platform code fails to report single MSI only.
---
arch/s390/pci/pci.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index f17a834..c79c6e4 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -427,6 +427,8 @@ int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
pr_debug("%s: requesting %d MSI-X interrupts...", __func__, nvec);
if (type != PCI_CAP_ID_MSIX && type != PCI_CAP_ID_MSI)
return -EINVAL;
+ if (type == PCI_CAP_ID_MSI && nvec > 1)
+ return 1;
msi_vecs = min(nvec, ZPCI_MSI_VEC_MAX);
msi_vecs = min_t(unsigned int, msi_vecs, CONFIG_PCI_NR_MSI);
Acked-by: Martin Schwidefsky <***@de.ibm.com>
--
blue skies,
Martin.

"Reality continues to ruin my life." - Calvin.
Alexander Gordeev
2013-10-02 10:48:59 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/lpfc/lpfc_init.c | 10 +++++++---
1 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index d83a1a3..0ec8008 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -8645,9 +8645,13 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
goto msg_fail_out;

vectors = min(vectors, rc);
- if (vectors > 1)
- rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
- vectors);
+ if (vectors < 2) {
+ rc = -ENOSPC;
+ goto msg_fail_out;
+ }
+
+ rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
+ vectors);
if (rc) {
msg_fail_out:
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:05 UTC
Permalink
The minimum number of MSI-Xs is (MLX5_EQ_VEC_COMP_BASE + 1) in
one check and 2 in another check. Make the checks consistent and
assume the minimum number is (MLX5_EQ_VEC_COMP_BASE + 1).

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 5e5c9a3..adf0e5d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -136,7 +136,7 @@ retry:
err = pci_enable_msix(dev->pdev, table->msix_arr, nvec);
if (err <= 0) {
return err;
- } else if (err > 2) {
+ } else if (err > MLX5_EQ_VEC_COMP_BASE) {
nvec = err;
goto retry;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:09 UTC
Permalink
Current MSI-X enablement code assumes MSI-Xs were successfully
allocated in case less than requested vectors were available.
That assumption is wrong, since MSI-Xs should be enabled with
a repeated call to pci_enable_msix(). This update fixes this.

Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/ntb/ntb_hw.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c
index 1cb6e51..de2062c 100644
--- a/drivers/ntb/ntb_hw.c
+++ b/drivers/ntb/ntb_hw.c
@@ -1075,6 +1075,10 @@ static int ntb_setup_msix(struct ntb_device *ndev)
"Only %d MSI-X vectors. Limiting the number of queues to that number.\n",
rc);
msix_entries = rc;
+
+ rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
+ if (rc)
+ goto err1;
}

for (i = 0; i < msix_entries; i++) {
--
1.7.7.6
Jon Mason
2013-10-03 00:49:28 UTC
Permalink
Post by Alexander Gordeev
Current MSI-X enablement code assumes MSI-Xs were successfully
allocated in case less than requested vectors were available.
That assumption is wrong, since MSI-Xs should be enabled with
a repeated call to pci_enable_msix(). This update fixes this.
Good catch, I'll pull it in for my next NTB release.

Thanks,
Jon
Post by Alexander Gordeev
---
drivers/ntb/ntb_hw.c | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c
index 1cb6e51..de2062c 100644
--- a/drivers/ntb/ntb_hw.c
+++ b/drivers/ntb/ntb_hw.c
@@ -1075,6 +1075,10 @@ static int ntb_setup_msix(struct ntb_device *ndev)
"Only %d MSI-X vectors. Limiting the number of queues to that number.\n",
rc);
msix_entries = rc;
+
+ rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries);
+ if (rc)
+ goto err1;
}
for (i = 0; i < msix_entries; i++) {
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:51 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/ipr.c | 8 ++------
1 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index 36ac1c3..fb57e21 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -9255,10 +9255,8 @@ static int ipr_enable_msix(struct ipr_ioa_cfg *ioa_cfg)
while ((err = pci_enable_msix(ioa_cfg->pdev, entries, vectors)) > 0)
vectors = err;

- if (err < 0) {
- pci_disable_msix(ioa_cfg->pdev);
+ if (err < 0)
return err;
- }

if (!err) {
for (i = 0; i < vectors; i++)
@@ -9278,10 +9276,8 @@ static int ipr_enable_msi(struct ipr_ioa_cfg *ioa_cfg)
while ((err = pci_enable_msi_block(ioa_cfg->pdev, vectors)) > 0)
vectors = err;

- if (err < 0) {
- pci_disable_msi(ioa_cfg->pdev);
+ if (err < 0)
return err;
- }

if (!err) {
for (i = 0; i < vectors; i++)
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:48 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/hpsa.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index eb17b3d..252b65d 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -4112,7 +4112,7 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)

err = pci_msix_table_size(h->pdev);
if (err < ARRAY_SIZE(hpsa_msix_entries))
- goto default_int_mode;
+ goto single_msi_mode;

for (i = 0; i < ARRAY_SIZE(hpsa_msix_entries); i++) {
hpsa_msix_entries[i].vector = 0;
@@ -4128,8 +4128,9 @@ static void hpsa_interrupt_mode(struct ctlr_info *h)
return;
}
dev_warn(&h->pdev->dev, "MSI-X init failed %d\n", err);
- goto default_int_mode;
+ goto single_msi_mode;
}
+single_msi_mode:
if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
dev_info(&h->pdev->dev, "MSI\n");
if (!pci_enable_msi(h->pdev))
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:32 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/neterion/vxge/vxge-main.c | 6 ++----
1 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index 5a20eaf..b81ff8b 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -2352,7 +2352,7 @@ start:
"%s: MSI-X enable failed for %d vectors, ret: %d",
VXGE_DRIVER_NAME, vdev->intr_cnt, ret);
if ((max_config_vpath != VXGE_USE_DEFAULT) || (ret < 3)) {
- ret = -ENODEV;
+ ret = -ENOSPC;
goto enable_msix_failed;
}

@@ -2365,10 +2365,8 @@ start:
vxge_close_vpaths(vdev, temp);
vdev->no_of_vpath = temp;
goto start;
- } else if (ret < 0) {
- ret = -ENODEV;
+ } else if (ret < 0)
goto enable_msix_failed;
- }
return 0;

enable_msix_failed:
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:34 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/block/cciss.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index bf11540..0eea035 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4081,7 +4081,7 @@ static void cciss_interrupt_mode(ctlr_info_t *h)
if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) {
err = pci_msix_table_size(h->pdev);
if (err < ARRAY_SIZE(cciss_msix_entries))
- goto default_int_mode;
+ goto single_msi_mode;
err = pci_enable_msix(h->pdev, cciss_msix_entries,
ARRAY_SIZE(cciss_msix_entries));
if (!err) {
@@ -4093,8 +4093,8 @@ static void cciss_interrupt_mode(ctlr_info_t *h)
return;
}
dev_warn(&h->pdev->dev, "MSI-X init failed %d\n", err);
- goto default_int_mode;
}
+single_msi_mode:
if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
if (!pci_enable_msi(h->pdev))
h->msi_vector = 1;
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:04 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/mellanox/mlx5/core/main.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c
index 3573ba4..5e5c9a3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c
@@ -122,7 +122,7 @@ static int mlx5_enable_msix(struct mlx5_core_dev *dev)
nvec = dev->caps.num_ports * num_online_cpus() + MLX5_EQ_VEC_COMP_BASE;
nvec = min_t(int, nvec, num_eqs);
if (nvec <= MLX5_EQ_VEC_COMP_BASE)
- return -ENOMEM;
+ return -ENOSPC;

table->msix_arr = kzalloc(nvec * sizeof(*table->msix_arr), GFP_KERNEL);
if (!table->msix_arr)
@@ -144,7 +144,7 @@ retry:
mlx5_core_dbg(dev, "received %d MSI vectors out of %d requested\n", err, nvec);
kfree(table->msix_arr);

- return 0;
+ return -ENOSPC;
}

static void mlx5_disable_msix(struct mlx5_core_dev *dev)
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:16 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index c4c5023..c6018bb 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -620,7 +620,7 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
num_msix);
if (qlcnic_83xx_check(adapter)) {
if (err < (QLC_83XX_MINIMUM_VECTOR - tx_vector))
- return err;
+ return -ENOSPC;
err -= (max_tx_rings + 1);
num_msix = rounddown_pow_of_two(err);
num_msix += (max_tx_rings + 1);
@@ -636,6 +636,7 @@ int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
num_msix);
goto enable_msix;
}
+ err = -ENOSPC;
} else {
dev_info(&pdev->dev,
"Unable to allocate %d MSI-X interrupt vectors\n",
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:29 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/vmxnet3/vmxnet3_drv.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 3518173..3df7f32 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2752,7 +2752,10 @@ vmxnet3_acquire_msix_vectors(struct vmxnet3_adapter *adapter,
"Failed to enable MSI-X, error: %d\n", err);
return err;
} else if (err < vector_threshold) {
- break;
+ dev_info(&adapter->pdev->dev,
+ "Number of MSI-Xs which can be allocated "
+ "is lower than min threshold required.\n");
+ return -ENOSPC;
} else {
/* If fails to enable required number of MSI-x vectors
* try enabling minimum number of vectors required.
@@ -2764,9 +2767,6 @@ vmxnet3_acquire_msix_vectors(struct vmxnet3_adapter *adapter,
}
}

- dev_info(&adapter->pdev->dev,
- "Number of MSI-X interrupts which can be allocated "
- "is lower than min threshold required.\n");
return err;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:57 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/lpfc/lpfc_init.c | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 647f5bf..0803b84 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -8080,7 +8080,7 @@ lpfc_sli_enable_msix(struct lpfc_hba *phba)
if (rc) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0420 PCI enable MSI-X failed (%d)\n", rc);
- goto msi_fail_out;
+ goto vec_fail_out;
}
for (i = 0; i < LPFC_MSIX_VECTORS; i++)
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
@@ -8158,6 +8158,8 @@ irq_fail_out:
msi_fail_out:
/* Unconfigure MSI-X capability structure */
pci_disable_msix(phba->pcidev);
+
+vec_fail_out:
return rc;
}

@@ -8646,7 +8648,7 @@ enable_msix_vectors:
} else if (rc) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0484 PCI enable MSI-X failed (%d)\n", rc);
- goto msi_fail_out;
+ goto vec_fail_out;
}

/* Log MSI-X vector assignment */
@@ -8698,9 +8700,10 @@ cfg_fail_out:
&phba->sli4_hba.fcp_eq_hdl[index]);
}

-msi_fail_out:
/* Unconfigure MSI-X capability structure */
pci_disable_msix(phba->pcidev);
+
+vec_fail_out:
return rc;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:30 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/net/vmxnet3/vmxnet3_drv.c | 16 ++++++++--------
1 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 3df7f32..00dc0d0 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -2814,12 +2814,14 @@ vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter)

err = vmxnet3_acquire_msix_vectors(adapter,
adapter->intr.num_intrs);
- /* If we cannot allocate one MSIx vector per queue
- * then limit the number of rx queues to 1
- */
- if (err == VMXNET3_LINUX_MIN_MSIX_VECT) {
- if (adapter->share_intr != VMXNET3_INTR_BUDDYSHARE
- || adapter->num_rx_queues != 1) {
+ if (!err) {
+ /* If we cannot allocate one MSIx vector per queue
+ * then limit the number of rx queues to 1
+ */
+ if ((adapter->intr.num_intrs ==
+ VMXNET3_LINUX_MIN_MSIX_VECT) &&
+ ((adapter->share_intr != VMXNET3_INTR_BUDDYSHARE) ||
+ (adapter->num_rx_queues != 1))) {
adapter->share_intr = VMXNET3_INTR_TXSHARE;
netdev_err(adapter->netdev,
"Number of rx queues : 1\n");
@@ -2829,8 +2831,6 @@ vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter)
}
return;
}
- if (!err)
- return;

/* If we cannot allocate MSIx vectors use only one rx queue */
dev_info(&adapter->pdev->dev,
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:49:00 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/scsi/lpfc/lpfc_init.c | 23 +++++++++++------------
1 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 0ec8008..0cfaf20 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -8633,10 +8633,6 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
{
int vectors, rc, index;

- /* Set up MSI-X multi-message vectors */
- for (index = 0; index < phba->cfg_fcp_io_channel; index++)
- phba->sli4_hba.msix_entries[index].entry = index;
-
/* Configure MSI-X capability structure */
vectors = phba->cfg_fcp_io_channel;

@@ -8650,14 +8646,14 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
goto msg_fail_out;
}

+ /* Set up MSI-X multi-message vectors */
+ for (index = 0; index < vectors; index++)
+ phba->sli4_hba.msix_entries[index].entry = index;
+
rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
vectors);
- if (rc) {
-msg_fail_out:
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0484 PCI enable MSI-X failed (%d)\n", rc);
- goto vec_fail_out;
- }
+ if (rc)
+ goto msg_fail_out;

/* Log MSI-X vector assignment */
for (index = 0; index < vectors; index++)
@@ -8697,7 +8693,7 @@ msg_fail_out:
}

lpfc_sli4_set_affinity(phba, vectors);
- return rc;
+ return 0;

cfg_fail_out:
/* free the irq already requested */
@@ -8710,8 +8706,11 @@ cfg_fail_out:

/* Unconfigure MSI-X capability structure */
pci_disable_msix(phba->pcidev);
+ return rc;

-vec_fail_out:
+msg_fail_out:
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0484 PCI enable MSI-X failed (%d)\n", rc);
return rc;
}
--
1.7.7.6
Alexander Gordeev
2013-10-02 10:48:23 UTC
Permalink
Currently pci_enable_msi_block() and pci_enable_msix() interfaces
return a error code in case of failure, 0 in case of success and a
positive value which indicates the number of MSI-X/MSI interrupts
that could have been allocated. The latter value should be passed
to a repeated call to the interfaces until a failure or success.

This technique proved to be confusing and error-prone. Vast share
of device drivers simply fail to follow the described guidelines.

This update converts pci_enable_msix() and pci_enable_msi_block()
interfaces to canonical kernel functions and makes them return a
error code in case of failure or 0 in case of success.

As result, device drivers will cease to use the overcomplicated
repeated fallbacks technique and resort to a straightforward
pattern - determine the number of MSI/MSI-X interrupts required
before calling pci_enable_msix() and pci_enable_msi_block()
interfaces.

Device drivers will use their knowledge of underlying hardware
to determine the number of MSI/MSI-X interrupts required.

The simplest case would be requesting all available interrupts -
to obtain that value device drivers will use pci_get_msi_cap()
interface for MSI and pci_msix_table_size() for MSI-X.

More complex cases would entail matching device capabilities
with the system environment, i.e. limiting number of hardware
queues (and hence associated MSI/MSI-X interrupts) to the number
of online CPUs.

Suggested-by: Tejun Heo <tj-DgEjT+Ai2ygdnm+***@public.gmane.org>
Signed-off-by: Alexander Gordeev <agordeev-H+wXaHxf7aLQT0dZR+***@public.gmane.org>
---
Documentation/PCI/MSI-HOWTO.txt | 71 ++++++++++++++++++---------------
arch/mips/pci/msi-octeon.c | 2 +-
arch/powerpc/kernel/msi.c | 2 +-
arch/powerpc/platforms/pseries/msi.c | 2 +-
arch/s390/pci/pci.c | 2 +-
arch/x86/kernel/apic/io_apic.c | 2 +-
drivers/pci/msi.c | 52 +++++++------------------
7 files changed, 58 insertions(+), 75 deletions(-)

diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt
index 1f37ce2..40abcfb 100644
--- a/Documentation/PCI/MSI-HOWTO.txt
+++ b/Documentation/PCI/MSI-HOWTO.txt
@@ -111,21 +111,27 @@ the device are in the range dev->irq to dev->irq + count - 1.

If this function returns a negative number, it indicates an error and
the driver should not attempt to request any more MSI interrupts for
-this device. If this function returns a positive number, it is
-less than 'count' and indicates the number of interrupts that could have
-been allocated. In neither case is the irq value updated or the device
-switched into MSI mode.
-
-The device driver must decide what action to take if
-pci_enable_msi_block() returns a value less than the number requested.
-For instance, the driver could still make use of fewer interrupts;
-in this case the driver should call pci_enable_msi_block()
-again. Note that it is not guaranteed to succeed, even when the
-'count' has been reduced to the value returned from a previous call to
-pci_enable_msi_block(). This is because there are multiple constraints
-on the number of vectors that can be allocated; pci_enable_msi_block()
-returns as soon as it finds any constraint that doesn't allow the
-call to succeed.
+this device.
+
+Device drivers should normally call pci_get_msi_cap() function before
+calling this function to determine maximum number of MSI interrupts
+a device can send.
+
+A sequence to achieve that might look like:
+
+static int foo_driver_enable_msi(struct foo_adapter *adapter, int nvec)
+{
+ rc = pci_get_msi_cap(adapter->pdev);
+ if (rc < 0)
+ return rc;
+
+ nvec = min(nvec, rc);
+ if (nvec < FOO_DRIVER_MINIMUM_NVEC) {
+ return -ENOSPC;
+
+ rc = pci_enable_msi_block(adapter->pdev, nvec);
+ return rc;
+}

4.2.3 pci_enable_msi_block_auto

@@ -218,9 +224,7 @@ interrupts assigned to the MSI-X vectors so it can free them again later.

If this function returns a negative number, it indicates an error and
the driver should not attempt to allocate any more MSI-X interrupts for
-this device. If it returns a positive number, it indicates the maximum
-number of interrupt vectors that could have been allocated. See example
-below.
+this device.

This function, in contrast with pci_enable_msi(), does not adjust
dev->irq. The device will not generate interrupts for this interrupt
@@ -229,24 +233,27 @@ number once MSI-X is enabled.
Device drivers should normally call this function once per device
during the initialization phase.

-It is ideal if drivers can cope with a variable number of MSI-X interrupts;
-there are many reasons why the platform may not be able to provide the
-exact number that a driver asks for.
+Device drivers should normally call pci_msix_table_size() function before
+calling this function to determine maximum number of MSI-X interrupts
+a device can send.

-A request loop to achieve that might look like:
+A sequence to achieve that might look like:

static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
{
- while (nvec >= FOO_DRIVER_MINIMUM_NVEC) {
- rc = pci_enable_msix(adapter->pdev,
- adapter->msix_entries, nvec);
- if (rc > 0)
- nvec = rc;
- else
- return rc;
- }
-
- return -ENOSPC;
+ rc = pci_msix_table_size(adapter->pdev);
+ if (rc < 0)
+ return rc;
+
+ nvec = min(nvec, rc);
+ if (nvec < FOO_DRIVER_MINIMUM_NVEC) {
+ return -ENOSPC;
+
+ for (i = 0; i < nvec; i++)
+ adapter->msix_entries[i].entry = i;
+
+ rc = pci_enable_msix(adapter->pdev, adapter->msix_entries, nvec);
+ return rc;
}

4.3.2 pci_disable_msix
diff --git a/arch/mips/pci/msi-octeon.c b/arch/mips/pci/msi-octeon.c
index d37be36..0ee5f4d 100644
--- a/arch/mips/pci/msi-octeon.c
+++ b/arch/mips/pci/msi-octeon.c
@@ -193,7 +193,7 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
* override arch_setup_msi_irqs()
*/
if (type == PCI_CAP_ID_MSI && nvec > 1)
- return 1;
+ return -EINVAL;

list_for_each_entry(entry, &dev->msi_list, list) {
ret = arch_setup_msi_irq(dev, entry);
diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index 8bbc12d..36d70b9 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -22,7 +22,7 @@ int arch_msi_check_device(struct pci_dev* dev, int nvec, int type)

/* PowerPC doesn't support multiple MSI yet */
if (type == PCI_CAP_ID_MSI && nvec > 1)
- return 1;
+ return -EINVAL;

if (ppc_md.msi_check_device) {
pr_debug("msi: Using platform check routine.\n");
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index 009ec73..89648c1 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -348,7 +348,7 @@ static int rtas_msi_check_device(struct pci_dev *pdev, int nvec, int type)
quota = msi_quota_for_device(pdev, nvec);

if (quota && quota < nvec)
- return quota;
+ return -ENOSPC;

return 0;
}
diff --git a/arch/s390/pci/pci.c b/arch/s390/pci/pci.c
index 61a3c2c..45a1875 100644
--- a/arch/s390/pci/pci.c
+++ b/arch/s390/pci/pci.c
@@ -426,7 +426,7 @@ int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)

pr_debug("%s: requesting %d MSI-X interrupts...", __func__, nvec);
if (type == PCI_CAP_ID_MSI && nvec > 1)
- return 1;
+ return -EINVAL;
msi_vecs = min(nvec, ZPCI_MSI_VEC_MAX);
msi_vecs = min_t(unsigned int, msi_vecs, CONFIG_PCI_NR_MSI);

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e63a5bd..6126eaf 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3145,7 +3145,7 @@ int native_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)

/* Multiple MSI vectors only supported with interrupt remapping */
if (type == PCI_CAP_ID_MSI && nvec > 1)
- return 1;
+ return -EINVAL;

node = dev_to_node(&dev->dev);
irq_want = nr_irqs_gsi;
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index ca59bfc..583ace1 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -719,7 +719,7 @@ static int msix_capability_init(struct pci_dev *dev,

ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
if (ret)
- goto out_avail;
+ goto error;

/*
* Some devices require MSI-X to be enabled before we can touch the
@@ -733,7 +733,7 @@ static int msix_capability_init(struct pci_dev *dev,

ret = populate_msi_sysfs(dev);
if (ret)
- goto out_free;
+ goto error;

/* Set MSI-X enabled bits and unmask the function */
pci_intx_for_msi(dev, 0);
@@ -744,24 +744,7 @@ static int msix_capability_init(struct pci_dev *dev,

return 0;

-out_avail:
- if (ret < 0) {
- /*
- * If we had some success, report the number of irqs
- * we succeeded in setting up.
- */
- struct msi_desc *entry;
- int avail = 0;
-
- list_for_each_entry(entry, &dev->msi_list, list) {
- if (entry->irq != 0)
- avail++;
- }
- if (avail != 0)
- ret = avail;
- }
-
-out_free:
+error:
free_msi_irqs(dev);

return ret;
@@ -832,13 +815,11 @@ EXPORT_SYMBOL(pci_get_msi_cap);
* @dev: device to configure
* @nvec: number of interrupts to configure
*
- * Allocate IRQs for a device with the MSI capability.
- * This function returns a negative errno if an error occurs. If it
- * is unable to allocate the number of interrupts requested, it returns
- * the number of interrupts it might be able to allocate. If it successfully
- * allocates at least the number of interrupts requested, it returns 0 and
- * updates the @dev's irq member to the lowest new interrupt number; the
- * other interrupt numbers allocated to this device are consecutive.
+ * Allocate IRQs for a device with the MSI capability. This function returns
+ * a negative errno if an error occurs. If it successfully allocates at least
+ * the number of interrupts requested, it returns 0 and updates the @dev's
+ * irq member to the lowest new interrupt number; the other interrupt numbers
+ * allocated to this device are consecutive.
*/
int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
{
@@ -848,7 +829,7 @@ int pci_enable_msi_block(struct pci_dev *dev, unsigned int nvec)
if (maxvec < 0)
return maxvec;
if (nvec > maxvec)
- return maxvec;
+ return -EINVAL;

status = pci_msi_check_device(dev, nvec, PCI_CAP_ID_MSI);
if (status)
@@ -879,13 +860,11 @@ int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *maxvec)
if (maxvec)
*maxvec = ret;

- do {
- nvec = ret;
- ret = pci_enable_msi_block(dev, nvec);
- } while (ret > 0);
-
- if (ret < 0)
+ nvec = ret;
+ ret = pci_enable_msi_block(dev, nvec);
+ if (ret)
return ret;
+
return nvec;
}
EXPORT_SYMBOL(pci_enable_msi_block_auto);
@@ -955,9 +934,6 @@ EXPORT_SYMBOL(pci_msix_table_size);
* MSI-X mode enabled on its hardware device function. A return of zero
* indicates the successful configuration of MSI-X capability structure
* with new allocated MSI-X irqs. A return of < 0 indicates a failure.
- * Or a return of > 0 indicates that driver request is exceeding the number
- * of irqs or MSI-X vectors available. Driver should use the returned value to
- * re-send its request.
**/
int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
{
@@ -975,7 +951,7 @@ int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
if (nr_entries < 0)
return nr_entries;
if (nvec > nr_entries)
- return nr_entries;
+ return -EINVAL;

/* Check for any invalid entries */
for (i = 0; i < nvec; i++) {
--
1.7.7.6

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Alexander Gordeev
2013-10-02 10:48:17 UTC
Permalink
Signed-off-by: Alexander Gordeev <***@redhat.com>
---
drivers/pci/msi.c | 11 +++++------
1 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d5f90d6..b43f391 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -719,7 +719,7 @@ static int msix_capability_init(struct pci_dev *dev,

ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
if (ret)
- goto error;
+ goto out_avail;

/*
* Some devices require MSI-X to be enabled before we can touch the
@@ -732,10 +732,8 @@ static int msix_capability_init(struct pci_dev *dev,
msix_program_entries(dev, entries);

ret = populate_msi_sysfs(dev);
- if (ret) {
- ret = 0;
- goto error;
- }
+ if (ret)
+ goto out_free;

/* Set MSI-X enabled bits and unmask the function */
pci_intx_for_msi(dev, 0);
@@ -746,7 +744,7 @@ static int msix_capability_init(struct pci_dev *dev,

return 0;

-error:
+out_avail:
if (ret < 0) {
/*
* If we had some success, report the number of irqs
@@ -763,6 +761,7 @@ error:
ret = avail;
}

+out_free:
free_msi_irqs(dev);

return ret;
--
1.7.7.6
Jon Mason
2013-10-03 00:39:05 UTC
Permalink
Since you are changing the behavior of the msix_capability_init
function on populate_msi_sysfs error, a comment describing why in this
commit would be nice.
Post by Alexander Gordeev
---
drivers/pci/msi.c | 11 +++++------
1 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d5f90d6..b43f391 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -719,7 +719,7 @@ static int msix_capability_init(struct pci_dev *dev,
ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
if (ret)
- goto error;
+ goto out_avail;
/*
* Some devices require MSI-X to be enabled before we can touch the
@@ -732,10 +732,8 @@ static int msix_capability_init(struct pci_dev *dev,
msix_program_entries(dev, entries);
ret = populate_msi_sysfs(dev);
- if (ret) {
- ret = 0;
- goto error;
- }
+ if (ret)
+ goto out_free;
/* Set MSI-X enabled bits and unmask the function */
pci_intx_for_msi(dev, 0);
@@ -746,7 +744,7 @@ static int msix_capability_init(struct pci_dev *dev,
return 0;
if (ret < 0) {
/*
* If we had some success, report the number of irqs
ret = avail;
}
free_msi_irqs(dev);
return ret;
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Ben Hutchings
2013-10-03 21:46:21 UTC
Permalink
Post by Jon Mason
Since you are changing the behavior of the msix_capability_init
function on populate_msi_sysfs error, a comment describing why in this
commit would be nice.
[...]

This function was already treating that error as fatal, and freeing the
MSIs. The change in behaviour is that it now returns the error code in
this case, rather than 0. This is obviously correct and properly
described by the one-line summary.

Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Jon Mason
2013-10-04 00:59:13 UTC
Permalink
Post by Ben Hutchings
Post by Jon Mason
Since you are changing the behavior of the msix_capability_init
function on populate_msi_sysfs error, a comment describing why in this
commit would be nice.
[...]
This function was already treating that error as fatal, and freeing the
MSIs. The change in behaviour is that it now returns the error code in
this case, rather than 0. This is obviously correct and properly
described by the one-line summary.
If someone dumb, like me, is looking at this commit and trying to
figure out what is happening, having ANY commit message is good. "Fix
the return value" doesn't tell me anything. Documenting what issue(s)
would've been seen had the error case been encountered and what will
now been seen would be very nice.
Post by Ben Hutchings
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Ben Hutchings
2013-10-03 22:49:45 UTC
Permalink
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
Currently pci_enable_msi_block() and pci_enable_msix() interfaces
return a error code in case of failure, 0 in case of success and a
positive value which indicates the number of MSI-X/MSI interrupts
that could have been allocated. The latter value should be passed
for (i = 0; i < FOO_DRIVER_MAXIMUM_NVEC; i++)
adapter->msix_entries[i].entry = i;
while (nvec >= FOO_DRIVER_MINIMUM_NVEC) {
rc = pci_enable_msix(adapter->pdev,
adapter->msix_entries, nvec);
if (rc > 0)
nvec = rc;
else
return rc;
}
return -ENOSPC;
This technique proved to be confusing and error-prone. Vast share
of device drivers simply fail to follow the described guidelines.
This update converts pci_enable_msix() and pci_enable_msi_block()
interfaces to canonical kernel functions and makes them return a
error code in case of failure or 0 in case of success.
[...]

I think this is fundamentally flawed: pci_msix_table_size() and
pci_get_msi_cap() can only report the limits of the *device* (which the
driver usually already knows), whereas MSI allocation can also be
constrained due to *global* limits on the number of distinct IRQs.

Currently pci_enable_msix() will report a positive value if it fails due
to the global limit. Your patch 7 removes that. pci_enable_msi_block()
unfortunately doesn't appear to do this.

It seems to me that a more useful interface would take a minimum and
maximum number of vectors from the driver. This wouldn't allow the
driver to specify that it could only accept, say, any even number within
a certain range, but you could still leave the current functions
available for any driver that needs that.

Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Alexander Gordeev
2013-10-04 08:29:20 UTC
Permalink
Post by Ben Hutchings
Post by Alexander Gordeev
This update converts pci_enable_msix() and pci_enable_msi_block()
interfaces to canonical kernel functions and makes them return a
error code in case of failure or 0 in case of success.
[...]
I think this is fundamentally flawed: pci_msix_table_size() and
pci_get_msi_cap() can only report the limits of the *device* (which the
driver usually already knows), whereas MSI allocation can also be
constrained due to *global* limits on the number of distinct IRQs.
Even the current implementation by no means addresses it. Although it
might seem a case for architectures to report the number of IRQs available
for a driver to retry, in fact they all just fail. The same applies to
*any* other type of resource involved: irq_desc's, CPU interrupt vector
space, msi_desc's etc. No platform cares about it and just bails out once
a constrain met (please correct me if I am wrong here). Given that Linux
has been doing well even on embedded I think we should not change it.

The only exception to the above is pSeries platform which takes advantage
of the current design (to implement MSI quota). There are indications we
can satisfy pSeries requirements, but the design proposed in this RFC
is not going to change drastically anyway. The start of the discusstion
is here: https://lkml.org/lkml/2013/9/5/293
Post by Ben Hutchings
Currently pci_enable_msix() will report a positive value if it fails due
to the global limit. Your patch 7 removes that. pci_enable_msi_block()
unfortunately doesn't appear to do this.
pci_enable_msi_block() can do more than one MSI only on x86 (with IOMMU),
but it does not bother to return positive numbers, indeed.
Post by Ben Hutchings
It seems to me that a more useful interface would take a minimum and
maximum number of vectors from the driver. This wouldn't allow the
driver to specify that it could only accept, say, any even number within
a certain range, but you could still leave the current functions
available for any driver that needs that.
Mmmm.. I am not sure I am getting it. Could you please rephrase?
Post by Ben Hutchings
Ben.
--
Regards,
Alexander Gordeev
***@redhat.com
Continue reading on narkive:
Loading...