Discussion:
[PATCH] net: fs_enet: set back promiscuity mode after restart
(too old to reply)
Christophe Leroy
2014-10-22 07:05:47 UTC
Permalink
After interface restart (eg: after link disconnection/reconnection), the bridge
function doesn't work anymore. This is due to the promiscuous mode being cleared
by the restart.

The mac-fcc already includes code to set the promiscuous mode back during the restart.
This patch adds the same handling to mac-fec and mac-scc.

Tested with bridge function on MPC885 with FEC.

Reported-by: Germain Montoies <***@c-s.fr>
Signed-off-by: Christophe Leroy <***@c-s.fr>

---
drivers/net/ethernet/freescale/fs_enet/mac-fec.c | 3 +++
drivers/net/ethernet/freescale/fs_enet/mac-scc.c | 3 +++
2 files changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-fec.c b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
index 3d4e08b..b34214e 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-fec.c
@@ -341,6 +341,9 @@ static void restart(struct net_device *dev)
FC(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */
}

+ /* Restore multicast and promiscuous settings */
+ set_multicast_list(dev);
+
/*
* Enable interrupts we wish to service.
*/
diff --git a/drivers/net/ethernet/freescale/fs_enet/mac-scc.c b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
index f30411f..7a184e8 100644
--- a/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
+++ b/drivers/net/ethernet/freescale/fs_enet/mac-scc.c
@@ -355,6 +355,9 @@ static void restart(struct net_device *dev)
if (fep->phydev->duplex)
S16(sccp, scc_psmr, SCC_PSMR_LPB | SCC_PSMR_FDE);

+ /* Restore multicast and promiscuous settings */
+ set_multicast_list(dev);
+
S32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
--
2.1.0
David Miller
2014-10-22 19:33:39 UTC
Permalink
From: Christophe Leroy <***@c-s.fr>
Date: Wed, 22 Oct 2014 09:05:47 +0200 (CEST)
Post by Christophe Leroy
After interface restart (eg: after link disconnection/reconnection), the bridge
function doesn't work anymore. This is due to the promiscuous mode being cleared
by the restart.
The mac-fcc already includes code to set the promiscuous mode back during the restart.
This patch adds the same handling to mac-fec and mac-scc.
Tested with bridge function on MPC885 with FEC.
Applied, thanks.

Continue reading on narkive:
Loading...