Discussion:
[PATCH net-next 2/3] gianfar: Fix the way the local advertising flow options are determined
(too old to reply)
Matei Pavaluca
2014-10-23 07:57:56 UTC
Permalink
From: Pavaluca Matei <***@freescale.com>

Local flow control options needed in order to resolve the negotiation
are incorrectly calculated.

Previously 'mii_advertise_flowctrl' was called to determine the local advertising
options, but these were determined based on FLOW_CTRL_RX/TX flags which are
never set through ethtool.
The patch simply translates from ethtool flow options to mii flow options.

Signed-off-by: Pavaluca Matei <***@freescale.com>
---
drivers/net/ethernet/freescale/gianfar.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 2485b74..329efca 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -3373,7 +3373,11 @@ static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv)
if (phydev->asym_pause)
rmt_adv |= LPA_PAUSE_ASYM;

- lcl_adv = mii_advertise_flowctrl(phydev->advertising);
+ lcl_adv = 0;
+ if (phydev->advertising & ADVERTISED_Pause)
+ lcl_adv |= ADVERTISE_PAUSE_CAP;
+ if (phydev->advertising & ADVERTISED_Asym_Pause)
+ lcl_adv |= ADVERTISE_PAUSE_ASYM;

flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
if (flowctrl & FLOW_CTRL_TX)
--
1.7.11.7
Matei Pavaluca
2014-10-23 07:57:57 UTC
Permalink
The hardware can automatically generate pause frames when the number
of free buffers drops under a certain threshold, but in order to do this,
the address of the last free buffer needs to be written to a specific
register for each RX queue.

This has to be done in 'gfar_clean_rx_ring' which is called for each
RX queue. In order not to impact performance, by adding a register write
for each incoming packet, this operation is done only when the PAUSE frame
transmission is enabled.

Whenever the link is readjusted, this capability is turned on or off.

Signed-off-by: Matei Pavaluca <***@freescale.com>
---
drivers/net/ethernet/freescale/gianfar.c | 56 ++++++++++++++++++++++++
drivers/net/ethernet/freescale/gianfar.h | 35 ++++++++++++++-
drivers/net/ethernet/freescale/gianfar_ethtool.c | 11 +++--
3 files changed, 98 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 329efca..e3b9759 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -173,10 +173,12 @@ static void gfar_init_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp,
static int gfar_init_bds(struct net_device *ndev)
{
struct gfar_private *priv = netdev_priv(ndev);
+ struct gfar __iomem *regs = priv->gfargrp[0].regs;
struct gfar_priv_tx_q *tx_queue = NULL;
struct gfar_priv_rx_q *rx_queue = NULL;
struct txbd8 *txbdp;
struct rxbd8 *rxbdp;
+ u32 *rfbptr;
int i, j;

for (i = 0; i < priv->num_tx_queues; i++) {
@@ -201,6 +203,7 @@ static int gfar_init_bds(struct net_device *ndev)
txbdp->status |= TXBD_WRAP;
}

+ rfbptr = &regs->rfbptr0;
for (i = 0; i < priv->num_rx_queues; i++) {
rx_queue = priv->rx_queue[i];
rx_queue->cur_rx = rx_queue->rx_bd_base;
@@ -227,6 +230,8 @@ static int gfar_init_bds(struct net_device *ndev)
rxbdp++;
}

+ rx_queue->rfbptr = rfbptr;
+ rfbptr += 2;
}

return 0;
@@ -336,6 +341,20 @@ static void gfar_init_tx_rx_base(struct gfar_private *priv)
}
}

+static void gfar_init_rqprm(struct gfar_private *priv)
+{
+ struct gfar __iomem *regs = priv->gfargrp[0].regs;
+ u32 __iomem *baddr;
+ int i;
+
+ baddr = &regs->rqprm0;
+ for (i = 0; i < priv->num_rx_queues; i++) {
+ gfar_write(baddr, priv->rx_queue[i]->rx_ring_size |
+ (DEFAULT_RX_LFC_THR << FBTHR_SHIFT));
+ baddr++;
+ }
+}
+
static void gfar_rx_buff_size_config(struct gfar_private *priv)
{
int frame_size = priv->ndev->mtu + ETH_HLEN + ETH_FCS_LEN;
@@ -396,6 +415,13 @@ static void gfar_mac_rx_config(struct gfar_private *priv)
if (priv->ndev->features & NETIF_F_HW_VLAN_CTAG_RX)
rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;

+ /* Clear the LFC bit */
+ gfar_write(&regs->rctrl, rctrl);
+ /* Init flow control threshold values */
+ gfar_init_rqprm(priv);
+ gfar_write(&regs->ptv, DEFAULT_LFC_PTVVAL);
+ rctrl |= RCTRL_LFC;
+
/* Init rctrl based on our settings */
gfar_write(&regs->rctrl, rctrl);
}
@@ -2859,6 +2885,10 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit)
/* Setup the new bdp */
gfar_new_rxbdp(rx_queue, bdp, newskb);

+ /* Update Last Free RxBD pointer for LFC */
+ if (rx_queue->rfbptr && priv->tx_actual_en)
+ gfar_write(rx_queue->rfbptr, (u32)bdp);
+
/* Update to the next pointer */
bdp = next_bd(bdp, base, rx_queue->rx_ring_size);

@@ -3393,6 +3423,11 @@ static noinline void gfar_update_link_state(struct gfar_private *priv)
{
struct gfar __iomem *regs = priv->gfargrp[0].regs;
struct phy_device *phydev = priv->phydev;
+ struct gfar_priv_grp *grp = NULL;
+ struct gfar_priv_rx_q *rx_queue = NULL;
+ unsigned long rstat_rxf;
+ int i, j, num_act_queues;
+ struct rxbd8 *bdp;

if (unlikely(test_bit(GFAR_RESETTING, &priv->state)))
return;
@@ -3401,6 +3436,7 @@ static noinline void gfar_update_link_state(struct gfar_private *priv)
u32 tempval1 = gfar_read(&regs->maccfg1);
u32 tempval = gfar_read(&regs->maccfg2);
u32 ecntrl = gfar_read(&regs->ecntrl);
+ u32 tx_flow_oldval = (tempval & MACCFG1_TX_FLOW);

if (phydev->duplex != priv->oldduplex) {
if (!(phydev->duplex))
@@ -3445,6 +3481,26 @@ static noinline void gfar_update_link_state(struct gfar_private *priv)
tempval1 &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
tempval1 |= gfar_get_flowctrl_cfg(priv);

+ /* Turn last free buffer recording on */
+ if ((tempval1 & MACCFG1_TX_FLOW) && !tx_flow_oldval) {
+ for (i = 0; i < priv->num_rx_queues; i++) {
+ rx_queue = priv->rx_queue[i];
+ bdp = rx_queue->cur_rx;
+ /* skip to previous bd */
+ bdp = skip_bd(bdp, rx_queue->rx_ring_size - 1,
+ rx_queue->rx_bd_base,
+ rx_queue->rx_ring_size);
+
+ if (rx_queue->rfbptr)
+ gfar_write(rx_queue->rfbptr, (u32)bdp);
+ }
+
+ priv->tx_actual_en = 1;
+ }
+
+ if (!(tempval1 & MACCFG1_TX_FLOW) && tx_flow_oldval)
+ priv->tx_actual_en = 0;
+
gfar_write(&regs->maccfg1, tempval1);
gfar_write(&regs->maccfg2, tempval);
gfar_write(&regs->ecntrl, ecntrl);
diff --git a/drivers/net/ethernet/freescale/gianfar.h b/drivers/net/ethernet/freescale/gianfar.h
index 6b00868..9ba16ad 100644
--- a/drivers/net/ethernet/freescale/gianfar.h
+++ b/drivers/net/ethernet/freescale/gianfar.h
@@ -99,6 +99,10 @@ extern const char gfar_driver_version[];
#define GFAR_MAX_FIFO_STARVE 511
#define GFAR_MAX_FIFO_STARVE_OFF 511

+#define FBTHR_SHIFT 24
+#define DEFAULT_RX_LFC_THR 16
+#define DEFAULT_LFC_PTVVAL 4
+
#define DEFAULT_RX_BUFFER_SIZE 1536
#define TX_RING_MOD_MASK(size) (size-1)
#define RX_RING_MOD_MASK(size) (size-1)
@@ -273,6 +277,7 @@ extern const char gfar_driver_version[];

#define RCTRL_TS_ENABLE 0x01000000
#define RCTRL_PAL_MASK 0x001f0000
+#define RCTRL_LFC 0x00004000
#define RCTRL_VLEX 0x00002000
#define RCTRL_FILREN 0x00001000
#define RCTRL_GHTX 0x00000400
@@ -849,7 +854,32 @@ struct gfar {
u8 res23c[248];
u32 attr; /* 0x.bf8 - Attributes Register */
u32 attreli; /* 0x.bfc - Attributes Extract Length and Extract Index Register */
- u8 res24[688];
+ u32 rqprm0; /* 0x.c00 - Receive queue parameters register 0 */
+ u32 rqprm1; /* 0x.c04 - Receive queue parameters register 1 */
+ u32 rqprm2; /* 0x.c08 - Receive queue parameters register 2 */
+ u32 rqprm3; /* 0x.c0c - Receive queue parameters register 3 */
+ u32 rqprm4; /* 0x.c10 - Receive queue parameters register 4 */
+ u32 rqprm5; /* 0x.c14 - Receive queue parameters register 5 */
+ u32 rqprm6; /* 0x.c18 - Receive queue parameters register 6 */
+ u32 rqprm7; /* 0x.c1c - Receive queue parameters register 7 */
+ u8 res24[36];
+ u32 rfbptr0; /* 0x.c44 - Last free RxBD pointer for ring 0 */
+ u8 res24a[4];
+ u32 rfbptr1; /* 0x.c4c - Last free RxBD pointer for ring 1 */
+ u8 res24b[4];
+ u32 rfbptr2; /* 0x.c54 - Last free RxBD pointer for ring 2 */
+ u8 res24c[4];
+ u32 rfbptr3; /* 0x.c5c - Last free RxBD pointer for ring 3 */
+ u8 res24d[4];
+ u32 rfbptr4; /* 0x.c64 - Last free RxBD pointer for ring 4 */
+ u8 res24e[4];
+ u32 rfbptr5; /* 0x.c6c - Last free RxBD pointer for ring 5 */
+ u8 res24f[4];
+ u32 rfbptr6; /* 0x.c74 - Last free RxBD pointer for ring 6 */
+ u8 res24g[4];
+ u32 rfbptr7; /* 0x.c7c - Last free RxBD pointer for ring 7 */
+ u8 res24h[4];
+ u8 res24x[556];
u32 isrg0; /* 0x.eb0 - Interrupt steering group 0 register */
u32 isrg1; /* 0x.eb4 - Interrupt steering group 1 register */
u32 isrg2; /* 0x.eb8 - Interrupt steering group 2 register */
@@ -1009,6 +1039,7 @@ struct gfar_priv_rx_q {
/* RX Coalescing values */
unsigned char rxcoalescing;
unsigned long rxic;
+ u32 *rfbptr;
};

enum gfar_irqinfo_id {
@@ -1134,6 +1165,8 @@ struct gfar_private {
tx_pause_en:1,
rx_pause_en:1;

+ int tx_actual_en;
+
/* The total tx and rx ring size for the enabled queues */
unsigned int total_tx_ring_size;
unsigned int total_rx_ring_size;
diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c
index 76d7070..0e8d8bf 100644
--- a/drivers/net/ethernet/freescale/gianfar_ethtool.c
+++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c
@@ -531,7 +531,7 @@ static int gfar_spauseparam(struct net_device *dev,
struct gfar_private *priv = netdev_priv(dev);
struct phy_device *phydev = priv->phydev;
struct gfar __iomem *regs = priv->gfargrp[0].regs;
- u32 oldadv, newadv;
+ u32 oldadv, newadv = 0;

if (!phydev)
return -ENODEV;
@@ -548,7 +548,7 @@ static int gfar_spauseparam(struct net_device *dev,
if (epause->tx_pause) {
priv->tx_pause_en = 1;
/* FLOW_CTRL_RX & TX */
- newadv = ADVERTISED_Pause;
+ newadv |= ADVERTISED_Pause;
} else /* FLOW_CTLR_RX */
newadv = ADVERTISED_Pause | ADVERTISED_Asym_Pause;
} else if (epause->tx_pause) {
@@ -579,8 +579,13 @@ static int gfar_spauseparam(struct net_device *dev,
u32 tempval;
tempval = gfar_read(&regs->maccfg1);
tempval &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
- if (priv->tx_pause_en)
+
+ priv->tx_actual_en = 0;
+ if (priv->tx_pause_en) {
+ priv->tx_actual_en = 1;
tempval |= MACCFG1_TX_FLOW;
+ }
+
if (priv->rx_pause_en)
tempval |= MACCFG1_RX_FLOW;
gfar_write(&regs->maccfg1, tempval);
--
1.7.11.7
Claudiu Manoil
2014-10-23 09:36:34 UTC
Permalink
X-Microsoft-Antispam: UriScan:;UriScan:;
X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:;SRVR:BY1PR0301MB1191;
X-Forefront-PRVS: 0373D94D15
Received-SPF: Fail (protection.outlook.com: domain of freescale.com does not
designate 192.88.158.2 as permitted sender) receiver=protection.outlook.com;
client-ip=192.88.158.2; helo=az84smr01.freescale.net;
Authentication-Results: spf=fail (sender IP is 192.88.158.2)
smtp.mailfrom=***@freescale.com;
X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:;SRVR:BY1PR0301MB1270;
X-OriginatorOrg: freescale.com
Sender: netdev-***@vger.kernel.org
Precedence: bulk
List-ID: <netdev.vger.kernel.org>
X-Mailing-List: ***@vger.kernel.org
Archived-At: <http://permalink.gmane.org/gmane.linux.network/335519>
The phy device supports 802.3x flow control, but the specific flags are not set
in the phy initialisation code. Flow control flags need to be added to the
supported capabilities of the phydev by the driver.
This is needed in order for ethtool to work ('ethtool -A' code checks for these
flags)
Acked-by: Claudiu Manoil <***@freescale.com>
Claudiu Manoil
2014-10-23 09:36:49 UTC
Permalink
Post by Matei Pavaluca
Local flow control options needed in order to resolve the negotiation
are incorrectly calculated.
Previously 'mii_advertise_flowctrl' was called to determine the local advertising
options, but these were determined based on FLOW_CTRL_RX/TX flags which are
never set through ethtool.
The patch simply translates from ethtool flow options to mii flow options.
Acked-by: Claudiu Manoil <***@freescale.com>

Continue reading on narkive:
Loading...